Filter
Top Products
GKS 324.0/GKS 644.0 5
Cleaning and Maintenance
For all surfaces
[
Do not remove the appliance for cleaning. It’s not necessary.
[
Do not use steam and/or pressure cleaning machines to clean the appli-
ance! This can damage the unit and result in personal injury.
[
Risk of burning! Make sure the appliance has cooled down before
cleaning.
[
Please refer to the instructions about cleaning agents.
Clean the appliance each time you use it. Dirt that isn't removed will burn into
the surface when you switch it on again and will be difficult or impossible to
remove.
Use a damp cloth or a soft sponge with warm water and a little detergent to
clean light amounts of surface dirt. Always wipe off the surface completely
with cold water to remove residues from cleansers than can cause discolora-
tion and stains. Wipe dry afterwards.
F
VSR O-FIX-C is perfect for the cleaning of glass ceramic. It is available
from KÜPPERSBUSCH Customer Service.
F
Cleaning the glass ceramic surfaces with a cleanser protects them from
discoloring, and reduces the danger of damage from sugar. Cleansers
can often remove discoloring or stains.
Do not use any
- harsh cleansers or cleansers with bleach or active oxygen, chlorine or cor-
rosive components.
- Abrasive or harsh cleansers or scouring products like steel wool, soap-filled
steel wool, metal or plastic sponges or similar products with an abrasive
surface.
Remove caking
Be sure to soak any crusty food debris with a wet cloth. It will make it easier
to remove the dirt.
Burner covers, attachements and saucepan supports
F
Burner covers and attachments can be cleaned in a dishwasher.
Clean the burner covers, attachements and saucepan supports in warm water.
Carefully rub them dry. All parts must be dry before replacing.
Assemble the burner:
– Replace the burner cover and
attachment carefully in the cor-
rect position.
– Make sure that the pins lock
into the grooves.
What to do if trouble occurs...
[
Use a qualified technician for repairs!
However, there are some problems that you can handle yourself. First, check
and see if there have been any operating errors. Remember: repairs during
the guarantee period are not free of charge if they are caused by operating
errors or non-observance of the following instructions:
F
For servicing the appliance: The instructions for removing and replacing
the cook top are found in the installation instructions.
After Sales Service
In the event of a problem that you can’t easily fix yourself, or for spare part
service, please contact the Küppersbusch Customer Care line at
.
1-800-459-0844
F
Always have the information from the identification panel handy when
calling Customer Service.
The panel is located on the underside of the cook top and on the cover page
of this manual.
Cover
Attachement
Fault Cause Remedy
The burners don’t ignite. Interruption of power
supply.
Check power supply. Use
matches in the interim.
Food remains or resi-
due from cleansers are
between ignition plug
and burner.
Release carefully and clean.
Defective ignition plug. Call Customer Service. Use
matches in the interim.
Sudden change in the flame
of the burner
Burner covers are
crooked.
Lock burner covers into
place.
It’s suddenly necessary to
hold the burner control knob
down longer for the flame to
burn.
Burner cover is crook-
ed.
Lock burner cover into place.
Temperature sensor is
bent.
Carefully bend sensor back
into place.
Serial number
Model