Filter
Top Products
34 35
EnglishEnglish
Jolly Dosato Model
Place the container under the dosing grinder fork (7).
Pull the dosing grinder lever (8) as many times as required to empty the
ground coffee container (5).
Remove the container from the body of the grinder as follows:
- seize the container (5) with one hand
- press the button (9) to release the container
- pull it out.
Wash the inside with soapy water to remove any coffee residues and oily
substances, dry it carefully and fit the container back in its place on the
body of the grinder by following the above steps in the reverse order.
10 – RANGE OF MODELS
Available in the following models:
- painted
- chrome
- copper
11 - CAUSES FOR OPERATING FAILURES OR ANOMALIES (TROUBLESHOOTING)
PROBLEMS CAUSE SOLUTION
The grinder does not 1. Power plug non inserted 1.Insert the plug in the power socket
switch on
2. The power supply does not 2. Check the power cable
reach the grinder
Mechanical block Foreign body between the
grinders
The dosing grinder does
Gear broken Refer to the SERVICE CENTRE
not turn
The dosing grinder lever Return spring broken Refer to the SERVICE CENTRE
does not move backwards
Very fine powder mixed
Grinders worn Refer to the SERVICE CENTRE
with larger fragments
Eliminate any foreign bodies that there
may be between the grinders, by slightly
loosening the bell jar. Restart the grinder,
after having brought the bell jar back in
its original position.