Filter
Top Products
– 6 –
PARTS, TOOLS, MATERIALS
You will need the following tools and materials for the installation:
Carton or other heavy material for covering the counter top.
Clear Tape
(for taping the templates to the wall)
Stud Finder
Phillips Screwdriver
Pencil
Flat Blade Screwdriver
Measuring Tape
Small Side Cutters or Tin Snips
Gloves
Keyhole Saw (for the power cord hole)
3/8" and 3/4" wood drill bits
1/2" and 3/16"
drill bits
Plumb Line
Duct Tape
Caulking Gun
Electric Drill
●
If you have brick or masonry walls, you will need special hardware and tools.
●
The ductwork you need for the installation is not included. All wall and roof caps must have a back-draft damper.
(Shown on page 5).
Saber Saw
(for cutting vent holes for roof
or wall venting)