Filter
Top Products
12
BEFORE USING THE COOKTOP
Before using the cooktop for the first time, clean it
thoroughly with the included cleaner or ceramic
cooktop cleaner according to the Care and
Cleaning instructions in this guide. This will help
protect the ceramic surface and make future
cleanup easier.
To operate the touch control pads, touch the pad
firmly with the flat part of your fingertip.
FIRST OPERATION
The first time that power is supplied to the cooktop,
the display for the controls lights for 1 seconds.
If you don't turn on the cooktop within 1 hour after
power is supplied to the cooktop, the display for the
controls blinks.
ACTIVATING THE COOKTOP
To turn ON the cooktop, touch the
POWER ON/OFF pad for
approximately 2 seconds.
The indicator above the pad will light.
To turn OFF the cooktop, touch the
POWER ON/OFF pad. The indicator
light above the pad will turn off.
NOTE: After turning on the cooktop with the
POWER ON/OFF pad, you must select one of the
Cooking Zones within 15 seconds using the
Cooking Zone ON pad(s). If no selection is made,
the cooktop will turn off for safety.
SELECTING THE COOKING ZONE
To select the desired Cooking Zone,
touch the ON pad.
The display for the selected Cooking
Zone will light.
The power level indicator lights are
blinking but no power level is set
NOTE: Once the Cooking Zone has been selected
with the ON pad, the power level must be selected
within 10 seconds with the Element power settings.
Otherwise, the Cooking Zone will turn off for safety.
SETTING THE CONTROLS
CAUTION
Never use scrub pads, abrasive or etching
cleaners. They can cause permanent damage
to the cooktop surface.