5
ENGLISH
SAFETY
PREPARE TO INSTALL THE RANGE
TOOLS NEEDED
Phillips Screwdriver
Pliers
Tape Measure
Pencil
1
/
4
” Nut Driver
Flat-blade
Screwdriver
Level
Adjustable Wrench
Safety Glasses
Gloves
Drill
PARTS PROVIDED
Template (1)
(For Anti-Tip Bracket Mounted
on Concrete Floors and Walls)
Anchor Sleeves (6)
Rear ller & 2 Screws
(LSE Series only)
Anti-Tip Bracket Kit (1)
Lag Bolts (6)
PARTS NOT PROVIDED
(UL Approved 40 or 50 AMP)
4-Wire Cord OR 3-Wire Cord
Strain Relief
(For Conduit
Installations Only)
• The information in this manual should be
followed exactly.
- A fire or electrical shock may result causing
property damage, personal injury or death.
WARNING
Tip - Over Hazard
A child or adult can tip the range and be
killed. Verify the anti-tip bracket have been
installed. Ensure the anti-tip bracket is
enganged when the range is moved.
Do not operate the range without the anti-
tip bracket in place. Failure to follow these
instructions can result in death or serious
burns to children and adults.
WARNING
To check visually that leveling leg is inserted
into bracket, grasp the top rear edge of the
range and carefully attempt to tilt it forward.
bracket
Leveling
leg
• Put on gloves during installation procedure.
- Failure to do so can result in bodily injury.
CAUTION
• Read all instructions contained in these installation
instructions before installing range.
• Remove all packing materials from the oven
compartments before connecting the electrical
supply to the range.
• Observe all governing codes and ordinances.
• Be sure to leave these instructions with the
consumer.
• Have the installer show you the location of the
circuit breaker or fuse. Mark it for easy reference.
NOTE
Keep these instructions with your owner’s manual
for future reference.
• As when using any appliance generating heat, there
are certain safety precautions you should follow.
• Be sure your range is installed and grounded
properly by a qualied installer or service technician.
• Make sure the wall coverings around the range
can withstand the heat generated by the range.
• To eliminate the need to reach over the surface
elements, cabinet storage space above the
elements should be avoided.
NOTE