Filter
Top Products
20
HOW TO USE
Operating Instructions
The value of setting can be changed by pressing “SETTING”
key.
The items are different from each model. Refer to “Setting
item chart”
SETTING ITEM CHART
How to set convection auto conversion
function for the lower oven (LDG3016ST)
When using convection bake and roast, the convection auto
conversion feature will automatically convert entered regular
baking temperatures to convection baking temperatures.
This feature is activated so that the display will show the
actual converted temperature. For example, if you enter a
regular recipe temperature of 350°F and touch the
q
key,
the display will show the converted temperature of
.
1
Press the
X
key will appear in the
display.
2
Press the
1
key once for a auto conversion on.
Press it again for a auto conversion off.
3
Press the
q
Key to accept the change.
1
Determine which oven you would like to adjust (upper or
lower).
2
For the lower oven, Press the SETTING key until
e
will appear in the display.
For the upper oven, Press the SETTING key until
f
will appear in the display.
3
Using the number keys, enter the amount of degrees that
you wish to adjust the oven up or down. To adjust the
temperature down, press the
X
key after entering
in the numbers.
Example:
To adjust the oven temperature
up
15 degrees, press
1
,
5
.
To Adjust the oven temperature
down
15 degrees, press
1
,
5
,
X
4
Press the
q
key to accept the change.
How to Set Preheating Alarm Light On/Off
When the oven reaches its set-temperature, the preheat light
will flash until the oven door is opened. You can activate or
deactivate the preheat alarm light.
1
Press the
X
key until
s
will display.
2
Press the number
1
key to select
R
/
S
.
3
Press the
q
key to accept the change.
How to turn the interior oven light on/off:
The interior oven light automatically turns on when the oven
door is opened.
Press the
M
or
Q
key to turn the oven lights on or off.
How to Adjust the Beeper Volume:
1
Press the
X
key until
j
will display.
2
Press the
1
key continuously to scroll through the volume
options:
m
,
l
,
S
.
3
Press the
q
key to accept the change.
CAUTION
DO NOT
use thermometers, such as those found in
grocery stores, to check the temperature setting of your
oven. These thermometers may vary 20–40 degrees.
NOTE
y
This adjustment will not affect the broiling or the Self
Clean temperatures. The adjustment will be retained in
memory after a power failure. The oven temperature
can be increased (+) or decreased (-) as much as 35°F
or 19°C.
y
To decrease or increase temperature during cooking
1. Using the number keys, enter the new temperature.
2. Press the
X
key once.
3. Press the
q
key to accept the choice.
Operating Instruction LDG3015ST/SB/SW LDG3016ST
Convection Auto Conversion - Once
Temperature Setting
(Lower oven)
Once Twice
Temperature Setting
(Upper oven)
Twice Three times
Preheating Alarm light On/off Three times Four times
Beeper Volume Four times Five times
Fahrenheit or Celsius Five times Six times
How to adjust the temperature settings:
You may find that your new oven cooks differently than the
one it replaced. Use your new oven for a few weeks to be-
come more familiar with it before changing the temperature
settings. After familiarizing yourself with the new oven, and
you still think that it is too hot or too cold, you can adjust the
thermostat yourself.