LG Electronics LDG3031ST Double Oven User Manual


 
2
INSTALLATION INSTRUCTIONS
INSTALLATION SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE INSTALLATION
BEFORE YOU BEGIN
Read these instructions completely
and carefully.
Installation of this range must conform with local
codes, or in the absence of local codes, with the
National Fuel Gas Code, ANSI Z223.1/NFPA.54,
latest edition. In Canada, installation must
conform with the current Natural Gas Installation
Code, CAN/CGAB149.1 or the current Propane
Installation Code, CAN/CGA-B149.2, and with
local codes where applicable. This range has been
design-certified by CSA International according
to ANSI Z21.1, latest edition and Canadian Gas
Association according to CAN/CGA-1.1 latest
edition.
As with any appliance using gas and generating
heat, there are certain safety precautions you
should follow. You will find these precautions in the
lmportant Safety Information section in your User’s
Guide. Read them carefully.
IMPORTANTSave these instructions
for local electrical inspector’s use.
IMPORTANTObserve all governing
codes and ordinances.
Note to Installer: Leave these instructions with
the appliance after installation is completed.
Note to Consumer: Keep the User’s Guide and
Installation Instructions for future reference.
NOTE: This appliance must be properly
grounded.
The electrical diagram is in an envelop attached
to the back of the range.
Skill level – Installation of this appliance requires
basic mechanical skills.
Proper installation is the responsibility of
theinstaller.
Product failure due to improper installation is not
covered under the Warranty.
• Remove all tape and packaging.
Make sure the burners are properly seated and
level.
Take the accessory pack out of the oven and/or
drawer.
Check to be sure that no range parts have come
loose during shipping.