LG Electronics LDG3036ST Range User Manual


 
7
ENGLISH
I N S TA L L AT I O N I N S T RU C T I O N S
Do not locate your range where it may be subject to
strong drafts. Any openings in the floor or wall behind
the range should be sealed. Make sure the openings
around the base of the range that supply fresh air
for combustion and ventilation are not blocked by
carpeting or woodwork.
Your range, like many other household units, is heavy and
can be installed on soft floor coverings such as cushioned
vinyl or carpeting. Use care when moving the range on
this type of flooring.
It is recommended that the following simple and
inexpensive instructions be followed to protect your floor.
This appliance must not be installed with a ventilation
system that blows air downward toward the range.
This type of ventilation system may cause ignition and
combustion problems with the gas cooking appliance
resulting in personal injury or unintended operation.
When the floor covering ends at the front of the range,
the area that the range will be installed on should be
built up with plywood to the same level or higher than the
floor covering. This will allow the range to be moved for
cleaning and servicing, as well as proper air flow to the
range.
Also, make sure the floor covering can resist 180°F (82°
C). See the "INSTALLATION SAFETY INSTRUCTIONS"
(included in this manual).
Make sure the wall coverings around your range can
resist the heat generated (up to 200°F/93°C) by the range.
See the "INSTALLATION SAFETY INSTRUCTIONS"
(included in this manual).
LOCATION