REMOVING AND REPLACING REFRIGERATOR DOORS (models with water dispenser)
1. Removing Refrigerator Door
NOTE: Handle appearance may vary,
IMPORTANT."Before you begin, turn the refrigerator OFF and unplug it, Remove food and any bins from doors.
• Left Door
• Loosen the screws and remove the cove on back side (see figure A).
• Disconnect water supply tube by pushing back on the disconnect ring (3).
• Loosen the cover screw (1).
• Disconnect door switch wire (2).
. Pull out the tube (4).
[] CAUTION: If a tube end is deformed or worn out, cut the damaged portion away.
• Disconnect wire harness (5).
• Loosen screws (6) and lift off the top hinge (7).
° Place the door on a non-scratching surface with the inside up.
[] CAUTION: When removing top hinge, be careful that the door does not fall forward.
• Right Door
• Loosen the cover screw (1).
• Disconnect door switch wire (2),
• Disconnect wire harness (4),
o Remove the ground screw (8),
= Loosen screws (6) and lift off the top hinge (7).
• Place the door on a non-scratching surface with the inside up,
FigureA
12
