Filter
Top Products
27 HOW TO USE
Control Pad Features
Refrigerator Temperature
Indicates the set temperature of the refrigerator
compartment in Celsius (°C) or Fahrenheit (°F).
Freezer Temperature
Indicates the set temperature of the freezer
compartment in Celsius (°C) or Fahrenheit (°F).
To change the temperature mode from °F to °C
(or vice versa) press and hold the Refrigerator
and Freezer temperature buttons simultaneously
for approximately ve seconds. The temperature
indicator on the display window switches
between Celsius and Fahrenheit.
Ice Plus
This function increases both ice making and
freezing capabilities.
When you touch the
Ice Plus
button, the
graphic will illuminate in the display and
will continue for 24 hours. The function
will automatically shut o after 24 hours.
You can stop this function manually by
touching the button one more time.
Door Alarm
When power is connected to the
refrigerator, the door alarm is initially set
to ON. When you press the
Door Alarm
button, the display will change to OFF and
the
Door Alarm
function will deactivate.
When either the refrigerator or the
freezer door is left open for more than 60
seconds, the alarm tone will sound to let
you know that the door is open.
When you close the door, the door alarm
will stop.
Control Button
LED Display Indicator
Control Pad
* Depending on the model, some of the following functions may not be available.
NOTE
The displayed temperature is the target
temperature, and not the actual temperature
of the refrigerator. The actual refrigerator
temperature depends on the food inside the
refrigerator.
CAUTION
Display Mode (For Store Use Only)
The Display Mode disables all cooling in
the refrigerator and freezer sections to
conserve energy while on display in a retail
store. When activated OFF will display
on the control panel and the display will
remain on for 20 seconds.
To deactivate / activate:
With either refrigerator door opened, press
and hold the Refrigerator and Ice Plus
buttons at the same time for ve seconds.
The control panel will beep and the
temperature settings will display to conrm
that Display Mode is deactivated. Use the
same procedure to activate Display Mode.
ENGLISH