Filter
Top Products
10
4. Removing Freezer Handle
Remove the cap (1) and the 2 caps (2) using a slotted
screwdriver.
Pull the cover (3) upward and take it of f.
Loosen the 2 screws (4), take off the handle (5), and
install it on the right.
Attach the cover (3) by pushing it down.
Attach the caps you removed earlier [figures (1) and
(2)].
5. Installing Freezer Door
Install the base grille (1).
Install the door (3) onto the bottom hinge pin.
Install the middle hinge (4) on the opposite side with the
screw (5) and the screws (9).
6. Installing Refrigerator Door
Place the washer (6) on the middle hinge pin (7).
Install the door (8) so that it fits onto the middle hinge
pin (7).
Install the top hinge (10) with serews.
Reinstall top hinge cover (11).
7. After Completing the Job
Make sure that the four corners of the door gasket are
not folded over. To ensure a good seal, apply a small
amount of silicon grease on the gasket.