11
USING YOUR MICROWAVE OVEN
Ez-ON
A time-saving pad, this simplified control lets
you quickly set and start microwave cooking
without the need to touch START.
NOTE:
If you touch Ez-ON, it will add 30 seconds up to
3 minutes 30 seconds; after 3 minutes 30 seconds,
every touch will add 1 minute up to 99 min 59
seconds.
If the CHILD LOCK was already set and you
touched another cooking pad, the word locked shows
in the display.
Then you can cancel the CHILD LOCK according
to below procedure.
After the CHILD LOCK is turned off, the time of
day will return to the display window. The oven
will operate normally.
CHILD LOCK
This is a unique safety feature that prevents
unwanted oven operation such as used by
children. Once the CHILD LOCK is set, no
cooking can take place.
KITCHEN TIMER
You can use the Timer of your oven for purposes
other than food cooking.
Example : To set Ez-ON cooking 2 minutes.
1. Touch STOP/CLEAR.
2. Touch Ez-ON 4 times.
The oven begins
cooking and display
shows time counting
down.
To set the child lock
Touch and hold START/ENTER
until locked appears in the
display.
If the time of day was already
set, the time of day will
return to the display window.
After you touch another
To cancel the child lock
Touch and hold START/ENTER
pad until locked disappears in
the display.
Example : To set the timer 3 minutes.
1. Touch STOP/CLEAR.
2. Touch KITCHEN TIMER
pad. enter time in min and
sec shows in the display.
3. Touch 3, 0, 0.
touch start shows in the
display.
4. Touch START/ENTER pad.
MORE/LESS
By using the MORE or LESS keys, TIMED COOK
program can be adjusted to cook food for a
longer or shorter time. Pressing MORE will add
10 seconds to the cooking time each time you
press it. Pressing LESS will subtract 10 seconds
of cooking time each time you press it.
To adjust the cooking time for a longer time,
or for a shorter time.
1. Touch STOP/CLEAR.
2. Touch 1, 0, 0.
3. Touch START/ENTER. then
the oven will start.
4. Touch MORE or LESS.
Remaining time will
increase or decrease by 10
seconds.
1
::
00
touch start or
power
shows on the display