Introduction
Select a Good
Location
Where to Locate
1. Place your appliance where it is easy to use.
2. Avoid placing the unit near heat sources, direct sunlight, or moisture.
3. To avoid vibrations, the appliance must be leveled.
4. Do not install this refrigerator in areas where the ambient temperature is below 41°F.
It will have an adverse effect on performance.
5. Allow the clearance of at least 2 inch from the ceiling and 1 inch from the side walls
for better cooling efficiency, ease of installation, proper air circulation and electrical
connections.
Method to remove protection film (Some Model)
1. Grasp the handles with both hands and hold them upward to remove.
2. Entirely remove the protection film adhered to the external surface of the door.
3. Assemble the fixing bracket on the both ends of the handle to the fixing bolt of the
door and lower the handle downward until it is entirely fixed.
7