Filter
Top Products
19
INSTALLATION
ENGLISH
1
Pull the drawer open to full extension.
2
Gently lift and pull out the ice bin. (Images
in the figure below may differ from the
actual drawers of the refrigerator.)
On the left rail, use a flat blade screwdriver
to push in on the tab to release the drawer
from the rail, as shown below. Once the
left side is loose, push the tab on the right
side with your finger to release the drawer.
Lift the front of the drawer up, then pull it
straight out.
3
Remove the screws from the rails at both
ends.
4
With both hands, grip both sides of the
drawer and pull it up to remove it from the
rails.
5
With both hands, hold each rail and push it in
to allow both rails to slide in simultaneously.
CAUTION
Do not hold the handle when removing
or replacing the drawer. The handle may
come off and it could cause personal
injury.