Liebherr 7082 135-00 Refrigerator User Manual


 
GB
= Display brightness
Adjusting the display brightness
• Activate setup mode by touching the SuperFrost icon for 5 sec-
onds.
• Touch the freezer compartment Down icon until
appears in
the display.
• Touch the SuperFrost icon.
- The display reads
• Touch the freezer compartment
Up/Down icons to select
0 = minimum to
5 = maximum brightness.
• Touch the SuperFrost icon at the desired value.
• Exit setup mode by touching
the freezer compartment On/Off icon.
= Door gasket heating control
Condensed water on the gasket of the refrigerator doors can be
eliminated by activating the door gasket heating.
Activating the door gasket heating
• Activate setup mode by touching the SuperFrost icon for 5 sec-
onds
• Touch the freezer compartment Down icon until
appears in
the display.
• Touch the SuperFrost icon.
- The display reads
• Touch the freezer compartment
Up/Down icons to select
= at slight condensation of the gasket,
= at heavy condensation of the gasket.
• Touch the SuperFrost icon at the desired value.
• Exit setup mode by touching
the freezer compartment On/Off icon.
Interior light
The interior light is located at the left, right and top in the refrigerator
compartment and above each drawer in the freezer compartment.
It comes on if one of the doors or a freezer drawer is opened.
Caution - class 1M laser radiation. When cover is removed, do
not look directly at light through optical instruments. Severe
eye injury can occur.
The light switches off automatically if one of the doors or a freezer
drawer has been left open for more than 15 minutes. The audible
warning signal sounds at the same time.
If one of the strip lights is not lit, it is defective.
The lighting may only be replaced by the customer service
technician or by competent skilled personnel!
Do not try to change the defective lighting yourself!
= Confirm dust filter cleaning
Once the dust filter in the appliance plinth has been cleaned, the
dust filter LED
in the display must be cancelled.
Cancelling the dust filter symbol
• Activate setup mode by touching the SuperFrost icon for 5
seconds.
• Touch the freezer compartment Down icon until
appears in
the display.
• Touch the SuperFrost icon.
- The display reads
• Touch the SuperFrost icon.
- The display reads
• The dust filter symbol has been cancelled.
• Exit setup mode by touching
the freezer compartment On/Off icon.
17