Filter
Top Products
u
Screw in ball stud
Fig. 3 (3)
together with the soft stop
mechanism
Fig. 3 (2)
in the fastening hole.
u
Re-attach all covers
Fig. 2 (5,6,7,8)
.
4 Kitchen Cabinet Construction
This is a fully integrated appliance which means that it is
fully enclosed by a kitchen cabinet. This type of cabinet
must be carefully constructed using the proper dimensions
and it must provide proper ventilation to ensure proper
appliance operation.
Make a separate kitchen cabinet
for each appliance for Side-by-
Side installations.
Consider having a professional install the appliance in your
kitchen cabinet.
4.1 Kitchen Cabinet Airflow
Fig. 4
- There must be a ventilation space at least 31 in
2
(200 cm
2
) at the airflow inlet
Fig. 4 (1)
and at the airflow
outlet
Fig. 4 (2)
.
- The top ventilation space can be either directly over the
appliance
Fig. 4 (2)
or next to the ceiling over a cabinet
Fig. 4 (3)
, or through a vent installed in a soffit
Fig. 4 (4)
.
Fig. 5
- There must be a clear ventilation space (without any
obstructions) of at least 1-1/2 in. (38 mm) at the back of
the kitchen cabinet.
u
Observe the above ventilation dimensions.
Ventilation through the cabinet base at the bottom can be
achieved by installing the provided ventilation grille
Fig. 6 (3)
or via a ventilation opening of at least 31 in
2
(200 cm
2
). When using the provided ventilation grille
Fig. 6 (3)
, please proceed as follows:
Kitchen Cabinet Construction
4