Liebherr HCS 20 Refrigerator User Manual


 
10
Fasten the appliance in the
recess - Figure 16
Fasten the appliance in the recess through the
upper and lower hinges of the refrigerator doors.
Use 2 screws for each hinge (Figure 16).
Leveling the Refrigerator - Figure 14
1. The height can be adjusted in front by twisting
the leveling feet
1
.
2. Twist the adjusting bolt
2
to set up the back of
the refrigerator.
3. Rotate leveling feet
1
until firmly in place
against the floor.
To prevent the appliance from tipping
forward the leveling feet
1
(Figure 14)
must have contact with the floor.
4. Align refrigerator with sides of kitchen cabinets
by adjusting leveling feet and the supports.
Figure 14
5 mm socket
27 mm wrench
screws 4 x 16 mm
Figure 15
Figure 16
INSTALLATION
Cover plate for 84" cabinets
In the panel set for 84" cabinets the plate provided
can be used to cover the space between aplliance
housing and cabinet top. Screw the cover plate on
the appliance housing using two screws M5 x 15
(Figure 15).