Freestanding/Semi Built In Models
CS 1601, 1650 - SBS 32S0
Ventilation Requirements CS 1601, CS 1650, SBS 32S0
This type of cabinet must be carefully constructed using the
correct dimensions and it must provide suitable ventilation to
ensure proper appliance operation.
Kitchen Cabinet Airflow
1. The following ventilation dimensions must be observed:
There must be a ventilation space at least 31 in.² (200 cm²)
at the airflow inlet (1) and at the airflow outlet (2). The 30"
and 60" models are equipped with a rolling base, which is
already providing you with the bottom airflow inlet require-
ments.
The top ventilation space can be directed in one of the fol-
lowing ways:
A) Directly over the appliance (2) with a gap of at least 2
inches between the ceiling of the unit and the cabinet
B) Above the cabinet and below the ceiling (3).
C) Through a vent installed in a soffit (4).
The refrigerator is designed to allow proper air flow when the
appliance is installed up against the wall.
A minimum space of 1 1/2" is required when a cabinet is built
above.
7
B - Side view
Cabinet
Refrigerator
A
B
C