Filter
Top Products
8
INSTALLATION
Installation and Fitting - Figure 3
Figure 3
1. Connect the appliance to the dedicated outlet.
2. Slide the appliance into the recess.
3. Secure the appliance in the recess using 4 x 14
mm screws.
The screws can be installed into the counter or
into the cabinet or frame on the sides of the wine
cooler, or in any combination. Four screws must be
used.
The appliance is adapted with a door opening lim-
iter. The maximum opening angle is 105°.
The wine cooler must be attached to the
cabinet or counter before it is used.
Fitting Dimensions - Figure 2
Figure 2
* Overall height can be increased by 2 inch (50 mm) by adjust-
ing the feet.
Adjust to recess height using the four adjustable
feet on the underside of the appliance.
Put the electrical outlet in a location where it does
not interfere when the wine cooler is placed into its
recess.
IMPORTANT
The fitting dimensions are actual, allow for
additional clearance for sliding the wine cooler
into its recess based on how you chose the
final installation to look. Make sure your instal-
lation does not block the ventilation grille.
(Figure 2a).
Figure 2a