Filter
Top Products
19
Installation Instructions
When making the wire connections, use the
entire length of conduit provided. The conduit
must not be shortened.
With the cooktop in place, open the front of
the cabinet door.
Insert the wires from the conduit through the
opening of the junction box.
Connect the red and black leads from the
cooktop conduit to the corresponding leads
in the junction box.
D
C
B
A
INSTALLATION—ELECTRICAL CONNECTIONS
Once the connections are made, secure wires
together using wire nuts.
GROUNDING INSTRUCTIONS:
The bare ground wire in the conduit is connected
to the cooktop frame. Effective January 1, 1996,
the National Electrical Code will not permit
grounding through neutral. If used in new
construction after January 1, 1996 or in a mobile
home, recreational vehicle or if local codes do not
permit grounding through the neutral white lead,
attach the appliance grounding lead (green or
copper) to the residence grounding conductor
(green or bare copper) in accordance with local
codes. When connecting to a 3 conductor branch
circuit, if local codes permit, connect the bare
ground connector lead of the cooktop to the
branch circuit neutral (gray or white in color).
IMPORTANT: If the cooktop is being
installed into a blind counter (one with no cabinet
opening below), wire connections must be made
before putting the cooktop into the cutout
opening.
E
Strain Relief Clamp
Black
Red
Ground
Strain Relief Clamp
Black
Red
Ground
Black
Red
Ground wire
location