Mackie CR-1604 Mixer User Manual


 
working S/N and 108dB
dynamic range. In the field,
this translates into two times
more headroom than old-style
mixers — where it counts in
the critical mix amp stage.
Instead of afterthought
XLRs stuck on the back, we
provide real phantom-pow-
ered mic inputs with
discrete, balanced micro-
phone preamps as good as
large consoles. Four conju-
gate-pair transistors with
large-emitter geometry re-
duce distortion at all levels,
while delivering extremely
low noise (our published
spec of –129.5dBm @150
ohms is real and verifiable)
and ultra-wide, 10Hz–
300kHz bandwidth.
A WEALTH OF
INNOVATIVE FEATURES
Constant-power pan pots
maintain consistent acoustic
power while panning center
to side. In-place stereo solo
maintains stereo perspective
when the user solos a chan-
nel — and the same button
provides individual channel
metering! An additional ALT
3/4 Bus provides an extra
stereo output mix for broad-
cast or recording. AUX sends
provide an extra 15dB of gain
above unity to maximize
effects at low volume levels,
allowing you to monitor
selected channels without
having to give up send capa-
bilities on other channels.
Equalization is at 80Hz,
2.5kHz and 12kHz… points
that prove to be more musi-
cally useful than those used
by most compact mixers.
The ultimate proof that
the CR-1604 stands above
other compact mixers is the
sheer number that are being
Mackie Designs Inc. is engaged in a
continuous program of product evaluation and
improvement and reserves the right to change
product specifications at any time without
notice. ©1995-1998 Mackie Designs Inc. All
rights reserved. “Mackie.” is a registered
trademark of Mackie Designs Inc.
installed every day. Join the
growing roster of system
designers and contractors
who are specifying the
CR-1604 on the basis of its
features, sound, and —
above all — its undispu-
table, rock-solid reliability.
3.05"
5.5"
3.05"
2.3"
2.3"
4.8"
15.8"
15.8"
18.2"
0.7"
including screw heads
17.34"
9.25"
6.4"
12.0"
9.25"
12.7"
12.0" 16.1"
10 rack spaces
11 rack spaces7 rack spaces
18.2"
19.0"
16.1"
5.9"
5.9"
6.6"
6.6"
7.1"
1.6"
1.5"
Note: RotoPod rack rail places mixer flush with
bottom rack space, allows gap at top for cables.
0.5"
0.5"
3.8"
4.5"
JACKS TO TOP
ROTOPOD (jacks on control plane)
JACKS TO BACK
Note: Dimensional drawings are shown with optional XLR10 and RotoPod assembly.
Max. Output:
+28 dBu main output bal.
+22 dBu all outputs unbal.
Dynamic Range: 108dB
Max Gain
Mic: 50 dB
Lines 1-6: 40 dB
Lines 7-16: 25 dB
Mic in to balanced line out:
86dB
Mic in to unbalanced line out:
80dB
Channel faders 1-16: 20 dB
AUX return: 20 dB
L/R master: 10 dB
Headphone Impedance:
20-2000 ohms.
Equalization:
Hi: Shelving, ±15 dB @ 12kHz
Mid: Peaking, ±12dB @ 2.5kHz
Lo: Shelving, ±15 dB @ 80Hz
Weight: 18 lbs.
Power consumption:
35 watts
MACKIE DESIGNS INC. • 16220 WOOD-RED RD. N.E.
WOODINVILLE • WA • USA • PHONE TOLLFREE 800/258-6883
FAX 425/487-4337 • OUTSIDE THE U.S., PHONE 425/487-4333
Frequency Response:
20Hz-20kHz ±1dB
Distortion:
less than 0.025%, 20Hz-20kHz
Noise:
Mic E.I.N.
–129.5 dBm, 150-ohm source
–131.2 dBv,150-ohm source
–131.5 dBm, input shorted
–133.7 dBv, input shorted
Main output noise:
–90 dBu
Working S/N ratio:
90 dBu (ref: +4 dBu)
SPECIFICATIONS
®