Filter
Top Products
8
TOASTING
1. Plug the appliance into the electrical socket.
2. Insert the slice(s) of bread into the slots.
3. Select the desired degree of toasting by adjusting the browning control knob.
4. Push down the lever to start the toasting cycle.
5. When cycled ends, the toast will pop up and the unit will shut off
automatically.
There are three function buttons to be chosen before toasting:
DEFROST (frozen), REHEAT (keep warm), BAGEL
DEFROST
The defrost button is designed to firstly defrost and then toast the bread, which
extends the toasting cycle slightly.
1) Insert slices of bread into the bread slots.
2) Turn the light/dark selector onto the desired position.
3) Press the “Defrost” button.
4) Press the bread carriage lever down until it locks into position.
5) When the cycle is completed the high lift lever will raise the toast up. To
terminate the cycle before it is completed, simply press the cancel button.
REHEAT
The reheat button is designed to warm the bread that has already been toasted,
which shortens the toasting cycle slightly.
1) Insert slices of bread into the bread slots.
2) Press the “Reheat” button.
3) Press the lever down until it locks into position.
4) When the cycle is completed the bread carriage will raise the toast up.
5) If you wish to stop the toasting before it is finished, simply press the cancel
button.
BAGEL
The bagel button is designed to only use one side(s) of the heating elements,
which will toast the cut side of the bagel.
1) Insert sliced bagel or English muffin with cut sides facing to the inside of
toaster. Only the inside coils will heat up.
2) Press the “Bagel” button.
3) Press the bread carriage lever down until it locks into position.
4) When the cycle is completed the lever will raise the bagel up. To terminate
the cycle before it is completed, simply press the cancel button.
CANCEL
If the user wishes to stop the toasting cycle at any moment, this button may be
pressed to stop the operation and the toast will pop up immediately.