Filter
Top Products
POPCORN
Defrosting By WT Function
(1)
(2)
(3)
(4)
(1)
(2)
(3)
(4)
(5)
1)
2)
3)
1)
2)
3)
4)
1)
(2)
(3)
(4)
(5)
Time Defrost Function
a) Default mode
b) Cooking-time adjustable mode
Note: Each press on "
START/+30SEC
" can increase
the cooking by 30 seconds for the microwave and
Auto menu cooking. However, the operation will not
work under "Weight Defrost" operation.
Press "
WEIGHT
DEFROST
", LED will display
"dEF1"; when at the same time " ", " "
indicators will be lighted.
Press numerical pads to input weight to be
defrosted. "Oz" indicator will be lighted.
Input the weight ranged between 4~100 Oz.
If the weight input is not within 4~100, the input
will be invalid. No "beep" will be sound and the
microwave will not work until valid numbers are
input .
Press " START/+30SEC. " to start defrosting and
the remained cooking time will be displayed. ":",
" " and " " indicators will be flashing
and the "Oz" indicator will go out.
Press " TIME DEFROST ", LED will display
"dEF2". At the same time, "
", " "
indicators
will be lighted.
Press number pads to input defrosting time. The
effective time range is 00:01~99:99.
If the time input is not within 00:01~99:99, no
"beep" will be sound and the microwave will not
work until valid numbers are input.
The default microwave power is power level 3.
If you want to change the power level, press "
POWER
" once, and the LED will display "PL 3",
then press the number pad of the power level
you wanted.
Press " START/+30SEC. " to start defrosting. The
remained cooking time will be displayed. ":",
" " and " " indicators will be flashing.
Press "
POPCORN
" to select popcorn mode,
" "," " and "Oz" are light. "1.75","3.0","3.5"
appears in the display.
Press " START/+30SEC. " to start cooking, the
buzzer will ring once, "Oz" will go out,
"
"
,
"
"
will flash.
When the cooking is over, the buzzer will ring 5
times, LED will display "0:00".
If the clock be setted(12-hour system), LED will
display the currently time.
Press "
POPCORN
" to select popcorn mode,
" "," " and "Oz" are light. "1.75","3.0","3.5"
appears in the display.
Press "
MEMORY
"
,
LED will display the cooking
time of the weight, the minute
figure is flashing.
Press the number keys and enter the time.
Press " MEMORY " to save the setting.If straight
press "
START
/+30 SEC.
", the oven will to cook
ith the amended cooking time. " "," "
will flash.
Users can change the cooking time
e.g.: Users set "
POPCORN
" time for 3 minutes
and 15 seconds.
Press" POPCORN " button once or twice when
the oven is on call ( the screen will display "1.75"
for once press and "3.0" for twice), then press
"
MEMORY
" button, LED screen will display the
default cooking time of current food weight ( which
is not 0:00 ), for example 1'30''. on the screen the
first number 1 glints, press nember button to input
3; the second number 3 glints, press number
button to input 1; the third num
ber 0 glints, press
number button to input 5.and then the first number
3 glints again (It is similar as clock setting ).
Press "MEMORY" again to save current setting.
If press "
START/+30SEC." to begin cooking
directly, the program will save the latest setting
of cooking time automatically.
To change the set cooking time, repeat step 1),
the screen will firstly display the saving time
( 3:15 for example ), press number button to reset
cooking time, and the follow step 2).
When completed, whenever press "
POPCORN
" button, screen displays food weight 1.75 , 3.0
or 3.5, only cooking time follows the saved time
setting.
To go back to initialization, press " POPCORN "
button for more than three seconds, the buzzer
will sound, then go back to initial setting.
9