Filter
Top Products
7
BEFORE USE
Check that accessories are complete and the unit is not damaged. Do not brew the coffee until
brewing clean water up to the marker indicated “MAX” then pouring out the water; follow the steps
below for one or two times. Using warm water, thoroughly clean the carafe, carafe lid, funnel, and
filter.
NOTE: The carafe lid is packaged separately. Before using, you must assemble
the lid and the carafe.
Assemble according to the following:
1. Firstly remove the carafe lid from the package, and place the lid on the
carafe; make sure the two tubers on the lid are aligned with the groove
of carafe.
2. Then press the lid on the arrow position with a little force (see Fig.1); the
notches will be pressed into the groove. The lid is assembled on the
carafe.
Fig.1