Filter
Top Products
5
OPERATING YOUR WINE COOLER
Temperature Control
The LCD display will show the actual temperature of the inside cabinet.
The interior temperature can be set to between 8°C (46°F) and 18°C (64°F) on the control
panel.
Press the up button to increase the temperature of inside the wine cooler.
Press the down button to decrease the temperature of inside the wine cooler.
Keep pressing the up/down buttons until the desired temperature is displayed. The LCD display
will flash and show the desired temperature for several seconds. After a few seconds, the
display will stop flashing and the readout will show the actual temperature of the inside cabinet.
While the wine cooler is working to achieve the desired set temperature，the LCD display will
show the actual temperature of inside cabinet.
NOTE: There may be a small temperature difference (±2°C between the LCD display and the
actual temperature of inside cabinet)
NOTE:
If the unit is unplugged, loses power; you must wait 3 to 5 minutes before restarting the
unit. If you attempt to restart before this time delay, the wine cooler may not start.
If there are no items inside the wine cooler, it may take approximately 3 ~ 4 hours to reach
the desired temperature setting.
The wine cooler is designed to fit eight standard unopened wine bottles. Bottles of different
sizes or opened bottles may need to be positioned at different angles and therefore affect
the storage capacity of the wine cooler.