OPERATING INSTRUCTIONS
SIGNALS DURING OVEN SETTINGS
ONE SIGNAL: Oven accepts the entry.
TWO SIGNALS: Oven does not accept the entry, check and try again.
SETTING THE CLOCK
1. Touch CLOCK pad.
2. Use the number pads to enter the
correct time. You must touch at least three
numbers to set the clock (one for hour and
two for minutes).
3. Touch CLOCK pad again.
NOTE:
·This is a 12 hour clock. When the oven is
first plugged in or when power resumes after
a power interruption, the display will show
ENTER CLOCK TIME. If you prefer to not
have the clock displayed, touch RESET.
·You can check the clock time while cooking
is in progress by touching the CLOCK pad.
SETTING THE KITCHEN TIMER
1. Touch TIMER pad.
2. Enter the amount of time by touching the
number pads. Digit time is in minutes and
seconds and set left to right. Set one digit (a
5 for 5 seconds) or up to four digits (2405 for
24 minutes, 5 seconds).
3. Touch START/STOP.
NOTE:
·Time countdown can be seen in display for
3 seconds before display returns to clock or
cooking time.
- To view the time left on the timer, simply,
touch TIMER pad.
·Touch TIMER and then touch RESET to
cancel TIMER during timing process.
SETTING A COOKING PROGRAM
A. One-stage Cooking
1. Use the number pads to set a cooking
time. You can set a cooking time from
one second to 99 minutes and 99
seconds.
2. If you want to set a power level other
than 100% power, touch POWER, then
Use the number pads to enter the power
level. You can set the power level from 1
to 9. To clarify, if you don’t want to
change the power level, please proceed
directly to step 3
3. Touch START/STOP to start cooking.
Use single digits to set a cooking power level:
Number pad Cooking power
9 90%
8 80%
7 70%
6 60%
5 50%
4 40%
3 30%
2 20%
1 10%
9