Filter
Top Products
8. When the semi-transparent masking and logo are in place,
apply pressure against the top of the masking, working
out any visible air bubbles. Remove the semi-transparent
logo masking very slowly, allowing only the urethane
logo to remain in the space within the template frame. As
the semi-transparent masking is pulled back, make sure
no stray pieces of urethane logo remain attached to
the semi-transparent masking. If this occurs, slowly
lower the masking and press firmly against it to make
sure the remaining piece sticks to the stainless steel.
9. Remove the template from the surface of the stainless
steel front panel.
10. Reattach the stainless steel front panel to the ice machine.
11. If the machine is on a beverage dispenser, re-attach the
drink dispenser ice bin cover.
Manitowoc Ice, Inc.
2110 South 26
th
Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA 000002851
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 Rev 01
Web Site - www.manitowocice.com 5/25/10