MartinLogan 6 Griddle User Manual


  Open as PDF
of 24
 
9
speCiFiCations*
Frequency.Response        
Dispersion.              
Sensitivity               
Impedance              
Crossover.Frequency       
High.Frequency.Driver.      
Low.Frequency.Drivers.    
Cabinet.               
Components            
Recommended.Amp.Power   
Binding.Post.Inputs         
Weight                
Dimensions.(HxWxD).      
MARTINLOGAN.MOTION.6
120–25,000 Hz ± 3 dB
80° x 80°
89 dB @ 2.83 volts/ meter
4 Ohms. Compatible with 4, 6
or 8 Ohm rated amplifiers.
3,300 Hz
1” x 1.4” (2.6cm x 3.6cm)
Folded Motion Transducer with
5.25” x 1.75” (13.3cm x
4.4cm) diaphragm.
Two 3.5” (8.9cm) poly cone
with stamped steel basket. Non-
resonant asymmetrical chamber
format. Rigid structured dust cap
to reduce cone break-up modes.
Sealed
Custom air core coil and low
DCR steel laminate inductors.
Polyester film capacitors in series
and low DF electrolytic capaci-
tors in parallel. Overall system
thermal/current protection.
20–130 watts
Push style with banana jacks
6 lbs. (2.72 kg)
5.25” x 17.5” x 3.75”
(13.3cm x 44.5cm x 9.5cm)
MARTINLOGAN.MOTION.8
.70–25,000 Hz ± 3 dB
80° x 80°
89 dB @ 2.83 volts/ meter
4 Ohms. Compatible with 4, 6
or 8 Ohm rated amplifiers.
3,000 Hz
1” x 1.4” (2.6cm x 3.6cm)
Folded Motion Transducer with
5.25” x 1.75” (13.3cm x
4.4cm) diaphragm.
Two 4” (10.2cm) paper cone
with stamped steel basket. Non-
resonant asymmetrical chamber
format. Rigid structured dust cap
to reduce cone break-up modes.
Sealed
Custom air core coil and low
DCR steel laminate inductors.
Polyester film capacitors in series
and low DF electrolytic capaci-
tors in parallel. Overall system
thermal/current protection.
20–180 watts
Push style with banana jacks
8.5 lbs. (3.85 kg)
5.6” x 22.25” x 5.25”
(14.2cm x 56.5cm x 13.3cm)
*Specifications are subject to change without notice.
 previous next