Filter
Top Products
NOTE: All specications subject to change without notice.
1287 - 2/08-web
©Master-Bilt Products division of Standex International, Inc. All rights reserved. Printed in U.S.A.
908 Highway 15 North • New Albany, MS 38652
PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com
BID SPECIFICATIONS
Item no. MCR-33-______
Provide______ ( ) Roll-in or
Pass-thru Blast Chiller(s)
Master-Bilt model number
MCR-33-______.
Blast chiller to be provided
with stainless steel construction
and polyurethane foamed-in-
place insulation. Blast chiller will
feature high velocity forced air
convection through evaporator
coil.
Probes with sequential read-
out display will be supplied for
food temperature recording (four
probes in MCR-33-101 model,
eight in MCR-33-102).
An automatic chill cycle
control with food temperature
probes is also supplied.
A thermometer will be pro-
vided for recording blast chiller
ambient air temperature. Ther-
mometer will require optional
printer for record of tempera-
tures.
Roll-in blast chillers will con-
tain one 30" x 78" ush mount-
ed, polyurethane foamed door.
Pass-thru models will contain
two doors. Doors will be provid-
ed with a 36" high 16 ga. stainless
steel kickplate on the exterior.
Doors will also be supplied with a
hold-open feature, magnetic gas-
kets and gasket heater.
Blast chillers will be provided
with an air- or water-cooled con-
densing unit depending on ap-
plication requirements.
Blast chiller will be equipped
with a standard exterior mount-
ed control panel featuring the
following:
• On/off switch
• Digital readout of interior ambi-
ent temperature and probe tem-
peratures
• Digital cycle timer for timed
chilling
• Microprocessor control system
enclosed in easily accessible box
• Automatic defrost cycle and
hold cycle
• Audible alarm at end of chill-
ing cycle
• Six programmable one-touch
preset chilling programs for
easy use
Blast chillers will be supplied
with stainless steel racks (one
rack for MCR-33-101/33-101PT,
two for MCR-33-102/33-102PT)
mounted on heavy-duty swivel
casters. Racks accommodate
26 pans, 12" x 20" x 2
1
/
2
", two
per each of 13 ledges. Each pan
holds up to 10 lbs. of food for to-
tal rack quantity of 260 lbs. Di-
mensions of rack are 24
1
/
2
" wide
x 27" deep x 68
5
/
16
" high.
Blast chillers to have standard
limited one year extended com-
pressor warranty (optional four
year extended warranty avail-
able) with one year limited parts
and limited 10 year for panels.
Blast chillers will be UL and
C-UL listed and UL EPH classied.