Master Bilt MPM-36 Refrigerator User Manual


  Open as PDF
of 2
 
908 Highway 15 North • New Albany, MS 38652
PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com
MPM SERIES
MEDIUM TEMP OPEN DISPLAY MERCHANDISERS
TECHNICAL SPECIFICATIONS
LISTINGS
HOOKUP
BID SPECIFICATIONS
Item no. MPM-_______________
Provide_______________( ) Medium
Temp Open Display Merchandiser(s), Mas-
ter-Bilt model no. MPM-__________.
Merchandiser to have removable two
tier stainless steel display deck, full length
315-5/08-web
©Master-Bilt Products division of Standex International, Inc. All rights reserved. Printed in U.S.A.
MPM-36 and MPM-48 via plug-in, 9 foot
long, exible three wire 14/3 cord with
molded plug. MPM-72 model hardwired
with separate 115V junction boxes for
cabinet and condensate evaporator.
PLAN VIEW SIDE VIEW ELEVATION VIEW
8
3
/
4
" wide laminated white formica coun-
ter top, front bumper guard, automatic
defrost, on/off power switch (MPM-36 and
MPM-48 only), black vinyl trim and have
foamed-in-place “zero ODP” urethane
insulation. The temperature range of the
merchandiser will be 34° to 41°F (1° to 5°C).
Merchandiser to have standard limited four
year extended compressor warranty and one
year limited parts and labor warranty. Mer-
chandiser to be UL and C-UL listed and UL
EPH classied.
NEMA 5-15P (MPM-36)
NEMA 5-20P (MPM-48)
MODEL
DIMENSIONS
(in.)
DIMENSIONS
(mm)
VOLTS AMPS
UNIT
H.P.
CAP.
CU. FT.
SHIP
CU. FT.
SHIP
WT.
LB/KGL D H L D H
MPM-36 36 30
1
/
2
43
1
/
4
914 787 1099 115 10.3 1/3 3.7 41.0 310/141
MPM-48 48 30
1
/
2
43
1
/
4
1219 787 1099 115 15.5 1/2 5.1 53.0 410/220
MPM-72 72 30
1
/
2
43
1
/
4
1829 787 1099 115/115* 15.8/10.4* 3/4 7.9 86.0 590/268
*Electric condensate evaporator requires separate power supply.
NOTE: All specications subject to change without notice.
RECOMMENDED OPERATING CONDITIONS
• Merchandisers designed to hold product
in the 34° to 41°F (1° to 5°C) range
• Designed to operate in air-conditioned
stores where the maximum temperature
is 75°F and the maximum relative
humidity is 55%
• Should not be installed in direct sunlight
• Should not be installed near HVAC vents,
fans or doorways that will disrupt airow
and compromise the function of the air
screen inside the case
• Bottom shelf should not be loaded such
that the front air intake is obstructed
• Factory installed controls should not
be altered, removed or replaced without
consent of the factory
• Product must not be displayed in the cold
air curtain
 previous