Master Bilt QMVM-48L Refrigerator User Manual


  Open as PDF
of 2
 
908 Highway 15 North • New Albany, MS 38652
PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com
QMVM-L SERIES
QUANTUM SERIES MEDIUM TEMP LOW PROFILE
OPEN DISPLAY MERCHANDISERS
TECHNICAL SPECIFICATIONS
1082-4/06-aq
©Master-Bilt Products division of Standex International, Inc. All rights reserved. Printed in U.S.A.
All specications subject to change without notice.
LISTINGS
HOOKUP
BID SPECIFICATIONS
Item no. QMVM-_______L
Provide__________( ) Quantum Series
Medium Temp Low Prole Open Display
Merchandiser(s), Master-Bilt model no.
QMVM-_______L.
Merchandiser to have standard electronic
controller eliminating the need for a room
thermostat, defrost termination/fan delay
control, defrost timer and digital thermom-
Electrical hookup: 115v
Plumbing hookup: Requires connection
to customer’s drain
eter or other temperature indicator.
Merchandiser to have two-position
shelves adjustable in 1" increments, perfo-
rated interior back wall, independent shelf
lighting and price tag molding. Merchan-
diser will also contain 2" foamed-in-place
“zero ODP” urethane insulation.
The refrigeration system is to be self-con-
tained, with front condenser air intake and
rear air discharge and use R-134a refriger-
ant. The temperature range is 34° to 41°F (1°
to 5°C). Merchandiser to have standard lim-
ited 4 year extended compressor warranty
and 1 year limited parts and labor warranty.
It is also to be UL and C-UL listed and UL
EPH classied.
RECOMMENDED OPERATING CONDITIONS
• Merchandisers designed to hold product
in the 34° to 41°F (1° to 5°C) range
• Designed to operate in air-conditioned
stores where the maximum temperature is
75°F and the maximum relative humidity
is 55%
• Should not be installed in direct sunlight
• Should not be installed near HVAC vents,
fans or doorways that will disrupt airow
and compromise the function of the air
screen inside the case
• Bottom shelf should not be loaded such
that the front air intake is obstructed
• Floor drain should be properly trapped
• Factory installed controls should not
be altered, removed or replaced without
consent of the factory
• Product must not be displayed in the cold
air curtain
MODEL
DIMENSIONS
(in.)
DIMENSIONS
(mm)
VOLTS AMPS
UNIT
H.P.
NO. OF
SHELVES
STANDARD
SHELF
SIZE
(in inches)
CAP.
CU.
FT.
SHIP
CU.
FT.
SHIP
WT.
LB/KGL D H L D H
QMVM-36L 36 30 60 914 762 1524 115 14.8 1/2 2 14 x 31
1
/
8
11.2 67.0 490/223
QMVM-48L 48 30 60 1219 762 1524 115 14.9 3/4 2 14 x 43
1
/
8
15.4 81.0 580/264
PLAN VIEW SIDE VIEW ELEVATION VIEW
NEMA 5-20P
 previous