Maytag 110 Range User Manual


 
10
Turn the Timer knob to
the (
) position.
Use the Adjusting knob
to set the ‘cooking time’
you need.
Turn the Timer knob to
the ( ) position. The
display will show the
current time of day plus
the ‘cook period’ you just
set.
Use the Adjusting knob
to set the ‘Stop time’ you
need.
‘Stop Time’ shows.
AUTO will show in the
display.
Set the oven(s) to the cooking tem per a ture you
need (don’t forget to set a function if using the
Multi-function oven).
Turn the Timer knob to the (
AUTO) setting.
When your cooking is fi nished the beeper sounds.
Turn the Timer knob to the vertical (
) to return
to manual cooking.
If you are out, don’t worry about the beeper going
off, it stops after a while. When you return, turn
the Timer knob to the vertical (
) to return to
manual cooking. Turn the thermostat to the off
position.
AUTO is showing, you want to
reset to manual cooking.
You can cancel any automatic settings by turning
the Timer knob to the vertical manual symbol (
).
Clock Special Features - Key Lock
When the key lock is activated, the clock can be
operated as usual but the ovens are locked and
will not come on. This means that your child could
select a cook program but the program will not be
activated and ovens will not switch on.
To activate the key lock
Make sure that the clock is in manual mode and
cancel any active programs.
Turn and hold the
Timer knob to the clock
symbol (
) for about 8
seconds. ‘On’ will appear
on the display.
Keep holding the Timer
knob turned to the
clock symbol ( ) and
turn the Adjusting knob
clockwise until the key
symbol ( ) and ‘Of’
shows on the display.
Let go of the knobs
The ovens are now
locked. After a few
seconds the display
will revert to show the
time of day and the key
symbol.
To turn off the key lock
Turn and hold the
Timer knob to the clock
symbol ( ) for about 8
seconds. ‘Of’ will appear
on the display.
Keep holding the Timer
knob turned to the
clock symbol (
) and
turn the Adjusting knob
clockwise until the key
symbol
(
) goes out on the
display and ‘On’ shows.
Let go of the knobs.
After a few seconds
the display will revert to
show the time of day.
The ovens can now be
used normally.