Filter
Top Products
8
630460069OPR
SAFETY LIMIT FEATURE
In addition to standard safety controls such as the high pressure cut–out, your ice machine features built–in
safety limits that stop the ice machine if conditions exist that may result in a major component failure.
NOTE: Before calling for service, restart the ice machine using the following procedures:
1. Turn power switch off and then back to ICE MAKING ( ON ) position. If the safety limit feature has stopped
the ice machine, it will restart after a short delay. Proceed to Step 2, but if the ice machine does not restart,
refer to ”Ice Machine Does Not Operate” in the problem checklist.
2. Let the ice machine operate to determine if the condition recurs...
A. If the ice machine stops again, the condition recurred; call for service.
B. If the ice machine continues to run, the condition corrected itself; let the machine run.