Maytag 61004966 Refrigerator User Manual


 
Before You Call
For further assistance contact Maytag Appliances Sales Company, Maytag Customer Assistance:
U.S. 1-800-688-9900 or Canada 1-800-688-2002
Moisture on inside cabinet walls
Excessive moisture in crisper
Water dispenser not operating
Cabinet light not working
Front cabinet surface
warm to the touch
Freezer not freezing properly
Sizzling sound in freezer
Visible glow in the freezer vents
Ice dispenser not operating
Ice cubes evaporate
Automatic ice maker not operating
Won’t Run
Runs too long/too frequently
Noisy operation
Odor in cabinet
Warm air from cabinet bottom
Cabinet Vibrates
Check these points if your refrigerator...
temperature control turned to “Off”
power cord not plugged in
no power at the electrical outlet
circuit breaker tripped or the house fuse blown
refrigerator is in automatic defrost
today’s refrigerators are larger and run colder, which requires more running time to
provide more stable temperatures
prolonged door openings
base grille blocked
too many door openings
door not sealing (due to a package or a container holding door open)
cabinet not level
weak floor
odor producing foods should be covered or wrapped
interior needs cleaning
normal air flow for condenser circulation
cabinet not level
weak floor
hot, humid weather
• frequent or prolonged door openings
door not closed properly
food not wrapped properly
hot, humid weather
bulb burned out
no power at the outlet
a normal sound caused by defrost water dripping on defrost mechanism
appearance of a red glow or reflection is normal during the defrost cycle
products with high sugar content may not harden completely when frozen (ice
cream, concentrated juice, etc.)
adjust freezer control to a colder setting
cold air moving over the ice cubes causes shrinkage, especially with limited usage.
This is normal.
stop arm in OFF (up) position
water supply turned off
water pressure too low
freezer too warm
special design to limit condensation during periods of high humidity
ice jam in the dispenser
ice maker not operating
lock switch on
water supply turned off
water pressure too low
lock switch on (see pg. 7)
11