Maytag MDB8600AWQ Dishwasher User Manual


 
Cycle Chart
!
WARNING
To avoid risk of electrical shock, personal injury, or death, disconnect power to dishwasher before servicing,
unless testing requires power.
16023220 8 May 2004
©2004 Maytag Services
Temperature Options (Available on select models)
: If the option is available for a given cycle, it forces a temp check at the end of the main wash, a 154°F temp check prior to the rinse aid dispense in the final rinse and adds an additional 5 minutes of rinse before the rinse aid dispense.
: If the option is available for a given cycle, it forces a 160°F temp check prior to the rinse aid dispense in the final rinse.
Notes
1. All times are approximate.
2. Temperature checks force a maximum 20 minute heating delay to reach the desired temperature.
3. The cycle definition gives the minimum and maximum possible cycle lengths. Actual cycle length and executed cycle functions will vary based on the sensor input.
4. Fill length varies between different models.
Sanitize Sanitize
160° Wash 160° Wash
Auto Clean
Available Options:
- This option adds and additional 18 minutes of heated wash to the main wash and 5 minutes of heated rinse to the final rinse.
- This option is the same as but the main wash temp check is boosted to 145°F.
Extra Rinse
- This option adds an additional fill between the main wash and the final rinse for an additional 5 minutes of unheated rinse.
Tough Scrub
Tough Scrub Plus Tough Scrub
Available Options:
- This options adds an additional fill between the main wash and the final rinse for an additional 5 minutes of unheated rinse.
Extra Rinse
QUICK WASH CYCLE
38 Minutes
FILL
1:36 min
1:46 max
FILL
1:36 min
1:46 max
DRAIN
2:00
RINSE
5:00
RINSE
AID
DISP
HEATED
Rinse
15:00
FILL
0:02
DET
DISP
HEATED
WASH
10:00
DRAIN
2:00
LIGHT WASH CYCLE
82 Minutes
FILL
1:36 min
1:46 max
FILL
1:36 min
1:46 max
FILL
1:36 min
1:46 max
RINSE
AID
DISP
DET
DISP
HEATED
PRE
WASH
10:00
HEATED
WASH
10:00
HEATED
RINSE
15:00
RINSE
5:00
DRAIN
2:00
FILL
0:02
DRY
CYCLE
30:00
TEMP
CHECK
140°F
DRAIN
2:00
DRAIN
2:20
Available Options:
- This option overrides the sensor’s decision to skip cycle functions and adds an additional 7 minutes of heated wash to the main wash.
- This option is the same as but the main wash temp check is boosted to 145°F.
Extra Rinse
- This option adds an additional fill between the main wash and the final rinse for an additional 5 minutes of unheated rinse.
Tough Scrub
Tough Scrub Plus Tough Scrub
NORMAL WASH CYCLE
(97 Minutes - min)
(118 Minutes - max)
FILL
1:36 min
1:46 max
FILL
1:36 min
1:46 max
FILL
1:36 min
1:46 max
FILL
1:36 min
1:46 max
RINSE
AID
DISP
DET
DISP
HEATED
PRE
WASH
8:00
HEATED
WASH
26:00
HEATED
WASH
2:00
HEATED
PRE
RINSE
10:00
HEATED
RINSE
10:00
HEATED
RINSE
10:00
RINSE
5:00
DRAIN
2:00
FILL
0:02
DRY
CYCLE
30:00
DRAIN
2:00
DRAIN
2:00
DRAIN
2:20
SKIP? SKIP? SKIP? SKIP?
SKIP?
Available Options:
No options are available with the cycle.
Rinse Only
RINSE ONLY CYCLE
9 Minutes
FILL
1:36 min
1:46 max
RINSE
5:00
DRAIN
2:00
FILL
0:02
Note: If is not selected, the heater will not beactivated during thedry cycle.
Heated Dry
DRY CYCLE 160° Wash
(Models without option)
HEATER
ON
3:00
HEATER
OFF
1:30
HEATER
ON
1:00
HEATER
OFF
1:30
HEATER
ON
1:00
VENT CLOSED VENT OPENED
HEATER
ON
1:00
HEATER
ON
1:00
HEATER
ON
1:00
HEATER
ON
1:00
HEATER
ON
1:00
HEATER
OFF
1:30
HEATER
OFF
1:30
HEATER
OFF
1:30
HEATER
OFF
1:30
HEATER
OFF
1:30
HEATER
OFF
9:30
Notes: If is not selected, theheater will not be activated during the dry cycle.
If is selected, the first two minutesof heatingischanged to2 minutes of unheated attheend ofthe
dry cycle.
Heated Dry
160° Wash
DRY CYCLE 160° Wash
(Models with option)
HEATER
ON
3:00
or
1:00
VENT CLOSED VENT OPENED
HEATER
ON
1:00
HEATER
ON
1:00
HEATER
ON
1:00
HEATER
ON
1:00
HEATER
OFF
7:00
or
9:00
HEATER
OFF
3:00
HEATER
OFF
3:00
HEATER
OFF
3:00
HEATER
OFF
3:00
HEATER
OFF
3:00
HEATER
ON
1:00
Available Options:
- This option adds and additional 5 minutes of heated wash to the pre-wash, an additional 12 minutes of heated wash to the main wash and an additional 5 minutes of heated rinse to the second pre-rinse.
- This option is the same as but the main wash temp check is boosted to 145°F.
Extra Rinse
- This option adds an additional fill between the main wash and the final rinse for an additional 10 minutes of heated rinse.
Tough Scrub
Tough Scrub Plus Tough Scrub
HEAVY WASH CYCLE
(130 Minutes - min)
(131 minutes - max)
FILL
1:36 min
1:46 max
FILL
1:36 min
1:46 max
FILL
1:36 min
1:46 max
FILL
1:36 min
1:46 max
FILL
1:36 min
1:46 max
RINSE
AID
DISP
DET
DISP
HEATED
PRE
WASH
8:00
HEATED
WASH
10:00
HEATED
WASH
18:00
PRE
RINSE
10:00
HEATED
PRE
RINSE
10:00
HEATED
RINSE
20:00
RINSE
5:00
DRAIN
2:00
FILL
0:02
TEMP
CHECK
145°F
TEMP
CHECK
140°F
DRAIN
2:00
DRAIN
2:00
DRAIN
2:00
DRAIN
2:20
DRY
CYCLE
30:00
Available Options:
- This option overrides the sensor’s decision to skip cycle functions.
- This option is the same as but the main wash temp check is boosted to 145°F.
Extra Rinse
- This option adds an additional fill between the main wash and the final rinse for an additional 5 minutes of unheated rinse.
Tough Scrub
Tough Scrub Plus Tough Scrub
AUTO CLEAN CYCLE
(97 Minutes - min)
(131 Minutes - max)
FILL
1:36 min
1:46 max
FILL
1:36 min
1:46 max
FILL
1:36 min
1:46 max
FILL
1:36 min
1.46 max
FILL
1:36 min
1:46 max
RINSE
AID
DISP
DET
DISP
HEATED
PRE
WASH
8:00
HEATED
WASH
26:00
HEATED
WASH
2:00
HEATED
PRE
RINSE
10:00
HEATED
RINSE
10:00
HEATED
RINSE
10:00
RINSE
5:00
DRAIN
2:00
FILL
0:02
TEMP
CHECK
145°F
TEMP
CHECK
140°F
DRAIN
2:00
DRAIN
2:00
DRAIN
2:00
SKIP? SKIP? SKIP? SKIP?
DRAIN
2:20
DRY
CYCLE
30:00
This represents the portion of a cycle that be
omitted. The determinationof whether a segment
is skipped or not is made by input from the sensor.
MAY
HEATED
PRE
RINSE
10:00
TEMP
CHECK
SEE NOTE
TC 2
TEMP
CHECK
SEE NOTE
TC 1
TC 1: If sensor detects lighter soil, the temp check will be 128 ° F
TC 2: If sensor detects lighter soil, the temp check will be 140 ° F
If sensor detects heavier soil, the temp check will be 140 ° F
If sensor detects heavier soil, the temp check will be 145 ° F