Filter
Top Products
28
Option adjustments
How to make option adjustments (models with LCD)
FIRST
Enter Option adjustment mode:
1
Press the button to turn power on. Open DishDrawer®.
2
Press and hold the / and buttons for 5 seconds until one long beep sounds.
FOLLOW THE
STEPS BELOW
Rinse aid setting
Water
softener
setting*
Auto power
option
End of wash
programme
beeps option
Closed
drawer
option
Clean dish
option**
PRESS THE
PRE
BUTTON
TO SCROLL
THROUGH
OPTIONS
MAKE AN
ADJUSTMENT
The current setting is shown on the wash
programme selector in red lights. If four red lights
are lit, the option selected setting is set to 4.
Press the
button to increase the setting.
Press the
button to turn the selected option on or off.
SAVE
Press the button to save the change.
EXAMPLE
Setting set to 4
On
Off
On
Off
On
Off
On
Off
*
This option is disabled on models without water softener. It appears in the sequence of options but cannot be adjusted.
**
The option sequence will start again from the Rinse aid setting.
/