Filter
Top Products
5
Example of timer set for five minutes:
• The timer will start automatically after four seconds.
A flashing colon indicates that the timer is in use
during another function’s operation.
• The last minute of the countdown will be displayed as
seconds.
3. At the end of the time set, one long beep will sound. (To
change the number of timer reminder beeps, see below.)
To cancel: Press and hold the TIMER pad for several
seconds. The time of day will reappear in the display.
Control Options
Timer Beep Option
You have a choice of three “end of timer” reminder
signals.
Option 1. One beep at the end of the timer operation, then,
one beep every 30 seconds for the next five minutes or
until the CANCEL pad is pressed.
Option 2. One beep at the end of the timer operation, then,
one beep every minute for the next 12 hours or until the
CANCEL pad is pressed.
Option 3. (default option) One beep at the end of the timer
operation, then, no other beeps.
Setting the Timer Beeps
1. Press the TIMER and CANCEL pads at the same time
and hold for several seconds.
• A single beep will sound.
• Display will show current option - 1, 2 or 3.
2. Press the
or pad to select the option number you
wish. The current time of day will reappear in the
display after four seconds.
CONTROL LOCK Pad
The control touch pads can be locked to prevent unwanted
use. They will not function when locked.
If an oven function is currently being used, the controls
cannot be locked.
The current time of day will remain in the display when this
feature is activated.
Setting Control Lock:
1. Press and hold the CONTROL LOCK pad for several
seconds. The control will beep once indicating it is locked.
• OFF will appear in the display for 15 seconds if any pad
is pressed.
To Cancel: Press and hold the CONTROL LOCK pad for
several seconds. The indicator word OFF will disappear in
the display.
Setting the CLOCK
1. Press CLOCK pad.
2. Press or press and hold
or pad until the correct
time of day appears in the display.
The display will flash when electrical power is first supplied
to the oven or if there has been a power failure.
To recall the time of day when another function is displayed,
press the CLOCK pad.
Clock time cannot be changed when the oven has been
programmed for clock controlled cooking, self-clean or
delayed self-clean.
Setting the TIMER
The timer can be set from one minute (0HR:01) up to 99 hours
and 59 minutes (99:59).
The timer can be used independently of any other oven
activity and it can be set while another oven function is
operating. THE TIMER DOES NOT CONTROL THE
OVEN.
1. Press the TIMER pad.
• The indicator word TIMER will flash.
2. Press or press and hold the
or pad until the correct
time appears in the display.
LOCK
00:05
0 0 0
BAKE
HR
°
DELAY COOK STOP TIMER CLEAN ROAST BROIL
Controls at a Glance (continued)