Filter
Top Products
OPERATING THE CONTROLS
FREEZER REFRIGERATOR
I I
D-INITIALSETTING 6-INITIALSETTING
G.GOLUF_T_E3q'ING II-COLOESTSEITtNG
Initial Setting of Controls Warm Cabinet Surfaces
Freezer Control: This control has settings from A Some portions of the cabinet may be warm to the
(warmest) to G (coldest). Initially set this eontrol to touch. This is a normal tkmction of the refrigerator
D. which helps prevent moisture from condensing on the
". ' ° " [ cabinet. This condition _x411be more noticeable when
NOTE. The coldest freezer , _ttmg ,(G) !s you first start your refrigerator, during hot weather and
1
recommended for short term use only ,
, , : : [ after excessive or lengthy door openings.
Refrigerator Control, This control has settings from ADJUSTING THE INTERIOR
1 (warmest) to 11 (coldest). Initially set this control to
6. The refrigerator may"rnn for several hours when yon Cantilever Shelves
first start it. This is normal. The refrigerator shelves are adjustable, all_wing you to
Let the refrigerator run at least 8 to 12 hours arrange the shelving to t_t your family_ food storage
before adding food• A day or so after adding food, you needs. Never attempt to adjust a shelf that is
may decide one or both compartments should be colder loaded with food.
or warme_: If so, adjust the control(s) as instrncted
To remove the refrigerator shclfl
below.
1. Grasp the shelf at the front with one hand and push
Adjusting the Temperature up under the shelf back with the other hand.
Controls 2. Lift the shelf straight out.
Except when starting the refrigerator, do not change
either control more than one number or letter at
a time. Allow '24 hours for the temperature to stabilize
before resetting. Changing either control will have
some eft_et on the temperature of the other
compartment.
Freezer too warm--Torn the freezer control to
the succeeding letter. For example, tuna the control
from D to E.
Freezer too cold--Turn the freezer control to the To rcplaee the refrigerator shelf:
preceding letter. For example, turn the control from
D to C. I, Keep the shelf horizontal. Guide dm tabs into the
slots in the shelf support at the back of the cabinet.
Refrigerator too warm--Turn the refrigerator
control to the next higher number. For example, 2. Lower the shell"until the tabs lock into position. Be
torn the control from 6 to 7. sure the shelf is secure before loading it with fi)od.
Refrigerator too eold--Tnrn the refrigerator Freezer Shelves
control to the next lower number. For example, turn The freezer shelves can be removed or adjusted to
the control from 6 to 5. accommodate large size packages and fbr cleaning.
PAGE3