Filter
Top Products
PRIOR TO FIRST USE
Before using the kettle for the first time (or
following a long period without use), the kettle
should be boiled 3 times.
1. Read the safety instructions through
carefully.
2. Ensure that the cord is fully extended.
3. Fill the kettle with water until the water level
reaches the maximum filling level of 1.7
litres.
4. Switch on the kettle by pointing the on/off
button (5) upwards “I”.
5. Pour out the water once it has boiled.
6. Repeat the process described under points
3-5 three times.
USING THE KETTLE
1. Pour fresh water into the kettle. The kettle
must contain at least 0.5 l and no more than
1.7 l.
2. Place the kettle on its base (7), which
should be placed on a fixed, flat surface.
3. Switch the kettle on with the on/off button
(5) so that the button is pointing upwards
towards the letter "I".
The red indicator light (4) will now light up and
the water will boil within a few minutes,
depending on the amount of water in the kettle.
If you want to interrupt the boiling, you can do
this at any time by pressing the on/off button (5)
or by lifting the kettle from its base (7).
When the water is boiling, the kettle will
automatically switch off thanks to the integrated
thermostat. The indicator light goes off and the
on/off button returns to the original position.
LIMESCALE FILTER
This kettle is equipped with a removable
limescale filter (8) that filters larger pieces of
limescale when water is poured from the kettle.
The filter is located at the front by the pouring
spout.
• Make sure you remove the filter regularly to
clean any limescale deposits from it.
• Then refit the filter.
CLEANING
• Before cleaning, remove the plug from the
wall socket and allow the kettle to cool
down.
•Clean the external surfaces of the kettle
with a damp cloth. The kettle must not be
submerged in any form of liquid.
• Do not use any kind of strong or abrasive
cleaning agent on the kettle or accessories.
Never use a scouring sponge or similar to
clean the kettle, as the surface may be
damaged.
• The removable limescale filter can be
cleaned using a washing-up brush or
similar. Make sure you do not damage the
filter membrane.
DESCALING
The lime content of ordinary tap water means
limescale may be deposited inside the kettle.
This limescale may be loosened using acetic
acid (NOT ordinary vinegar) or descaler, available
in supermarkets etc.
1. Mix 100 ml acetic acid with 300 ml cold
water, or follow the instructions on the
descaler packaging.
2. Pour the solution into the kettle and switch
it on.
3. Allow the solution to boil twice and then
pour it out.
4. To remove the final residues of limescale
and acetic acid, pour cold water into the
kettle again (up to the maximum mark) and
switch it on.
5. Pour out the water once it has boiled.
6. Repeat the process described under points
4-5 three times.
7. The kettle is now ready for use again.
ENVIRONMENTAL TIPS
Once any electrical product is no longer
functional, it should be disposed of in such a
way as to cause minimum environmental impact,
in accordance with the regulations of your local
authority. In most cases you can take such
products to your local recycling station.
GUARANTEE TERMS
The guarantee does not apply:
• if the above instructions are not followed
• if the appliance has been interfered with
• if the appliance has been mishandled,
subjected to rough treatment, or has
suffered any other form of damage
• if faults have arisen as a result of faults in
your electricity supply.
Due to the constant development of our
products in terms of function and design, we
reserve the right to make changes to the product
without prior warning.
IMPORTER
Adexi Group
11
245041_IM 21/01/05 14:44 Side 11