INTRODUCTION
To get the best out of your new kettle, please read
through these instructions carefully before using
it for the first time. Pay particular attention to the
safety measures. We also recommend that you
keep the instructions for future reference, so that
you can remind yourself of the functions of the
kettle.
SAFETY MEASURES
Normal use of the kettle
• Incorrect use of the kettle may cause
personal injury and damage to the kettle.
• Use the kettle for its intended purpose only.
The manufacturer is not responsible for
any damage resulting from incorrect use or
handling (see also Guarantee Terms).
• The kettle may only be connected to 230 V,
50 Hz.
• The kettle should not be switched on unless
there is water in it.
• The kettle or cord must not be placed in
water or any other liquid.
• Never leave the kettle unattended when in
use and keep an eye on children.
• The water level in the kettle must not exceed
the maximum filling level (MAX 1.7L) marked
on the water level gauges.
• This kettle is not suitable for commercial or
outdoor use.
Positioning the kettle
• Always place the kettle at the back of a
kitchen counter and at a safe distance
from flammable objects such as curtains,
tablecloths or similar.
• Always place the kettle so that the spout is
turned away from any other surfaces as the
steam from boiling water may damage them.
• Do not cover the kettle.
• Do not allow the cord to hang over the edge
of the counter, and keep it away from hot
objects and naked flames.
• Return the kettle to its base after use.
Cord, plug and mains socket
• Check regularly that the cord is not damaged
and do not use the kettle if it is, or if it has
been dropped or damaged in any other way.
• If the kettle, cord or plug is damaged, it must
be inspected and, if necessary, repaired by
an authorised repair engineer, otherwise
there is a risk of electric shock. Never try to
repair the appliance yourself.
• Remove the plug from the socket for
cleaning.
• Avoid pulling the cord when removing the
plug from the socket. Instead, hold the plug.
• Check that it is not possible to pull or trip
over the kettle or any extension cord.
KEY
1. Pouring spout
2. Lid
3. Water level gauge
4. Indicator light
5. On/off button
6. Switch
7. Base
8. Removable limescale filter
9. Lock for opening of lid
PRIOR TO FIRST USE
Before using the kettle for the first time (or
following a long period without use), the kettle
should be boiled 3 times.
1. Read the safety instructions through
carefully.
2. Ensure that the cord is fully extended.
3. Fill the kettle with water until the water level
reaches the maximum filling level of 1.7 litres.
4. Switch on the kettle by pointing the on/off
button (5) upwards “I”.
5. Pour out the water once it has boiled.
6. Repeat the process described under points
3-5 three times.
USING THE KETTLE
1. Pour fresh water into the kettle. The kettle
must contain at least 0.5 l and no more than
1.7 l.
2. Place the kettle on its base (7), which should
be placed on a fixed, flat surface.
3. Switch the kettle on with the on/off button
(5) so that the button is pointing upwards
towards the letter "I".
10
UK
1
2
9
76
5
4
3
8