Filter
Top Products
Congratulation with your new Drinks mixer please
read all instructions before you start using your
new Drinks mixer. We recommend that you save
this instruction manual for later use.
IMPORTANT SAFEGUARDS:
When using electric appliances, basic safety
precautions should always be followed including
the following:
- Read all instructions before use.
-To protect against risk of electrical shock, do
not put cord, plugs, or the main body in
water or other liquids.
- Close supervision is needed when this
appliance is used by or near children.
- Unplug from outlet when not in use, before
putting on or taking off parts, and before
cleaning.
-Avoid contacting moving parts.
- Do not use outdoors.
- Do not let cord hang over edge of table or
counter.
- Keep hands and utensils out of the cup to
reduce the risk of injury to person or damage
to the mixer.
This appliance is designed for short time
operation. After 4 minutes continuous use, allow a
few minutes rest before next use to avoid
overheating.
If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a
similar qualified person in order to avoid a hazard.
MAIN COMPONENTS:
HOW TO USE:
- Before the first use, wash all parts except
base in warm, soapy water. Rinse and dry.
Never immerse the base assembly in water;
it can only be wiped with wet cloth.
- If the cup is leaking, return the Drinks mixer
to the shop.
- Plug the cord into a 230 -240 volt AC power
outlet and turn the power on.
-With the cup placed on a bench or flat
surface, place ingredients into the stainless
steel mixing cup.
Note:
We recommend that you do not fill liquid beyond
the top fill mark on the side of the cup- 380 ml.
This will help prevent the mixture from splashing
out during mixing. The volume of the milk shake
will increase, which makes the 850 ml milk shake
cup ideal for the frothiest shakes.
Attach the stainless steel mixing cup to the drink
mixer by sliding the lip of the of the mixing cup
under the cup holder and setting the bottom
edge of the mixing cup un the cup rest.
Note:
The drinks mixer will only operate when the
stainless steel mixing cup is in place.
-Turn the dial to mix at the speed you want:
1: low speed
2: high speed
0: stop
- The Drinks mixer has a safety switch, which
will stop the machine if the cup is not in
proper position.
Hints before starting the mixer
- Always be sure that the mixer is in the "0"
position before plugging in the mixer and
before removing the mixing cup.
- Add wet ingredients before dry ingredients
for the best mixing result.
- The mixing time of beverages containing ice
cream type ingredients will vary according
to the hardness of the ingredients.
- If your recipe call for ice, use only crushed
ice in the drink mixer.
- Do not mix hot ingredients with your drinks
mixer.
- Only use the drink mixer with the stainless
cup attached.
10
UK
TSK9412 IM 19/12/02 11:41 Side 10