Melissa 246-029 Blender User Manual


 
14 15
14 15
KEY TO MAIN COMPONENTS OF THE
APPLIANCE
1. Cord with plug
2. Motor section
3. On/off button
4. Base
5. Cutter (at the bottom of the glass jug)
6. Glass jug with measuring scales
7. Lid
8. Groove
9. Stopper (and measuring cup)
10. Spout
11. Spindle
PRIOR TO FIRST USE
Read through the safety instructions
carefully.
• Beforeusingforthersttime,orafter
prolonged storage without use, wash
any parts that will come into contact
with food.
• Placethemotorsection(2)onaat
surface, e.g. a kitchen counter, and
makesureitisstandingrmlyonthe
three rubber legs.
Fit the glass jug (6) onto the spindle
(11) of the motor section, so that the
bottom(4)tsontothemotorsection.
oEnsurethetwopartstcorrectlyto
avoid any gaps between the bottom
and the motor section.
USE
1. Check that the on/off button (3) is at
the“OFF”position(off).
2. Remove the lid (7) from the appliance
and add food to the jug.
oNOTE:Neverlltheglassjugabove
themark“1250ml/1.25l”onthe
jug.
3. Replace the lid securely so that it
covers the spout (10). Insert the
stopper (9) in the lid and turn it 90
degrees clockwise to lock it into
position.
4. Insert the plug (1) in the mains socket
and switch on the power.
5. Place a hand on top of the lid to hold it
in place.
6. Switch on the appliance by switching
the on/off button to one of the following
positions:
o“I”(lowestspeed,idealforliquids)
o“II”(highestspeed,idealforsolid
foods)
o“PULSE”(theapplianceisonly
running as long as the on/off button
is kept in this position).
7. Switch off the appliance by turning the
on/offbuttontothe“OFF”position.
Then remove the plug from the socket.
8. Wait, until the cutter (5) has stopped
moving, before removing the lid from
the appliance.
NOTE: Never use the appliance for more
than 3 minutes at a time. If the appliance
has been running for 3 minutes, leave it to
cool down before you use it again.
TIP:
The appliance is suitable for crushing
ice. Stop the procedure regularly so
you can see, when the ice is of the
required texture.
The stopper has measuring lines,
enabling it to be used as a measuring
cup.
The glass jug has different measuring
scales – both litres and millilitres as well
as the US measures ounces and cups.
CLEANING AND STORAGE
Remove plug from the mains socket,
and allow the appliance to cool down
before cleaning it.
The appliance must not be submerged
in any form of liquid.
Clean the appliance by wiping it with
a damp cloth. A little detergent can be
added if the appliance is heavily soiled.
Never use a scouring pad, steel wool or
any form of strong solvents or abrasive
cleaning agents to clean the appliance,
as those may damage the outside
surfaces of the appliance.
Be careful not to touch the sharp cutter
blades at the bottom of the glass jug!
The lid and stopper can be washed by
hand or in a dishwasher. The jug and
the motor section are NOT dishwasher-
proof.
Ensure the appliance is clean and dry
before storing.
The appliance contains sharp parts
- keep out of the reach of children.