18 19
18 19
KEY
1. Water reservoir cover
2. Water reservoir
3. Water level gauge (on glass pot)
4. Filter holder
5. Handle
6. Anti-drip valve
7. Hotplate (beneath glass pot)
8. Control panel with display and
buttons
9. Glass pot (with lid)
10. Water level gauge (on reservoir)
11. Power cable and plug
12. Measuring spoon (not visible on
picture)
a. Start/stopbutton
b. "AUTO"button(timerfunction)
c. "PRO"button(timer)
d. Timer indicator
e. "MIN"button(minutes)
f. Display
g. "HR" button (timer)
h. Start/stopindicator
PRIOR TO FIRST USE
• Readthesafetyinstructions
through carefully.
• Ensurethatthecordisfully
extended.
• Cleanglasspot(9)insoapywater.
• Torinsetheappliancethrough,
pass a potful of water through the
machinebeforeusingitfortherst
time.
o Follow the instructions in
"Operatingtheappliance",but
WITHOUTusingalteror
coffee.
SETTING THE TIMER AND START
TIME
Theappliancehasabuilt-intimer.You
can use this to set the appliance to
startatagiventime(see"Operating
the appliance").
NOTE:Thetimerwillrequireresetting
each time the appliance has been
disconnected from the mains. Reset
the time when reconnecting the
appliance.
Setting the clock
• Placetheplug(11)inthesocket.
The clock on the display (f) will
show"12:00"andash.
• Pressthe"PRO"button(c)once.
Thedisplaywillshow"SETTIME"
in the top left corner.
• Youcannowsetthetimeusingthe
HR(g)buttonforhoursandMIN(e)
button for minutes.
• Settingwillstopautomatically
when you have not pressed any
button for approx. 8 seconds. The
clock has now been set.
Setting start time
• Pressthe"PRO"buttontwice.The
displaywillshow"SETTIMER"in
the top right corner.
• Youcannowsetthestarttime
using the HR (g) button for hours
andMIN(e)buttonforminutes.
• Settingwillstopautomatically
when you have not pressed any
button for approx. 8 seconds. The
start time has now been set.
OPERATING THE APPLIANCE
Regardless of whether you want
to make coffee with or without the
time, the start procedure is always as
follows:
• Pourfreshwaterintotheglasspot.
• Liftthecover(1)ofthewater
reservoir, and carefully pour the
water from the glass pot into the
reservoir (2).
• Closethepotlid,andplaceit
on the hot plate (7). Check it
is correctly positioned, so that
the anti-drip valve (6) is pressed
upwards and is opened.