Melissa 645-096 Hot Beverage Maker User Manual


 
2
3
UK
INTRODUCTION
To get the best out of your new kettle, please read
through these instructions carefully before using it
for the rst time. Pay particular attention to the sa-
fety measures. We also recommend that you keep
the instructions for future reference, so that you
can remind yourself of the functions of the kettle.
SAFETY MEASURES
Normal use of the kettle
Incorrect use of the kettle may cause personal
injury and damage to the kettle.
Use the kettle for its intended purpose only.
The manufacturer is not responsible for any da-
mage resulting from incorrect use or handling
(see also Guarantee Terms).
The kettle may only be connected to 230 V, 50
Hz.
The kettle should not be switched on unless
there is water in it.
The kettle or cord must not be placed in water
or any other liquid.
Never leave the kettle unattended when in use
and keep an eye on children.
The water level in the kettle must not exceed
the maximum lling level (MAX 1.7L) marked on
the water level gauges.
This kettle is not suitable for commercial or
outdoor use.
Positioning the kettle
Always place the kettle at the back of a kitchen
counter and at a safe distance from ammable
objects such as curtains, tablecloths or similar.
Always place the kettle so that the spout is tur-
ned away from any other surfaces as the steam
from boiling water may damage them.
Do not cover the kettle.
Do not allow the cord to hang over the edge of
the counter, and keep it away from hot objects
and naked ames.
Return the kettle to its base after use.
Cord, plug and mains socket
Check regularly that the cord is not damaged
and do not use the kettle if it is, or if it has been
dropped or damaged in any other way.
If the kettle, cord or plug is damaged, it must
be inspected and, if necessary, repaired by an
authorised repair engineer, otherwise there is
a risk of electric shock. Never try to repair the
appliance yourself.
Remove the plug from the socket for cleaning.
Avoid pulling the cord when removing the plug
from the socket. Instead, hold the plug.
Check that it is not possible to pull or trip over
the kettle or any extension cord.
KEY
1. Pouring spout
2. Lid
3. Water level gauge (one on each side)
4. Indicator light
5. On/off button
6. Switch
7. Base
8. Removable limescale lter
PRIOR TO FIRST USE
Before using the kettle for the rst time (or follo-
wing a long period without use), the kettle should
be boiled 3 times.
1. Read the safety instructions through carefully.
2. Ensure that the cord is fully extended.
3. Fill the kettle with water until the water level
reaches the maximum lling level of 1.7 litres.
4. Switch on the kettle by pressing the on/off but-
ton (5) down.
5. Pour out the water once it has boiled.
6. Repeat the process described under points 3-5
three times.
USING THE KETTLE
1. Pour fresh water into the kettle. The kettle must
contain at least 0.5 l and no more than 1.7 l.
2. Place the kettle on its base (7), which should
be placed on a xed, at surface.
3. Switch the kettle on by pressing the on/off but-
ton (5) so that the button is depressed towards
the letter ”I”.
2.
8.
1.
3. 4. 5.
6. 7.