14 15
14 15
KEY TO MAIN COMPONENTS OF THE
APPLIANCE
1. Cord with plug
2. Water level gauge
3. Water reservoir
4. Cover for water reservoir
5. Coverforlterfunnel
6. Filter funnel
7. Plasticlter(mayreplacepaperlters)
8. Anti-drip device
9. Handle
10. Button for opening lid
11. Lid for glass pot
12. Glass pot
13. Hotplate
14.On/offbutton
PRIOR TO FIRST USE
• Read through the safety instructions
carefully.
• Unroll the cord (1) fully before use.
• Torinseouttheinside,llthereservoir
with water, switch on and allow the
water to run through the appliance,
before using it to make coffee.
USE
1. Plug in and switch on the power.
2. Flip open the cover for the water
reservoir (4) and carefully pour the
required amount of water into the water
reservoir.
oDonotlloverthetopmarkonthe
level gauge (2).
3. Swingthelterfunnel(6)totheright
soitisclearofthecovertothelter
funnel(5).Placetheplasticlterora
lter(size1x4)inthelterfunnel,and
measure coffee or tea into it. Make sure
thatthelteriscompletelyinsertedin
the funnel. If necessary, bend the lower
edgeofthelter.Swingthelterfunnel
back into its position.
4. Ensure that the cover (11) for the glass
pot (12) is down and then place the pot
onthehotplate(13)beneaththelter
funnel.
5. Switch on the appliance by switching
the on/off button (14) to "I". The on/off
button is now lit and the appliance will
start.
o You can remove the glass pot
during brewing to pour a cup.
The automatic anti-drip device (8)
ensures that coffee does not drip
fromthelterontothehotplate.
As soon as you replace the glass
pot, brewing will resume. Make sure
you put the pot back within 30
seconds or less, as otherwise the
lterfunnelcouldoverow.
o Always make sure the lid on the
glass pot is closed, otherwise
the anti-drip device does not work
correctly.
6. Oncethecoffeeisready,thehotplate
under the glass pot will keep it hot.
7. Switch off by pushing the on/off button
to the "0" position.
oTheapplianceisttedwith
an overheating cut-out which
automatically switches it off if you
forget.
CLEANING
• Remove plug from the mains socket,
and allow the appliance to cool down
before cleaning it.
• The appliance must not be submerged
in any form of liquid.
• Clean the appliance by wiping it with
a damp cloth. A little detergent can be
added if the appliance is heavily soiled.
• Never use a scouring pad or any form
of strong solvents or abrasive cleaning
agents to clean the appliance, as those
may damage the outside surfaces of
the appliance.
• Thelterfunnelandglasspotcan
be washed using normal washing-up
liquid,butareNOTdishwasher-safe.
o Dismantle the
lterfunnelby
swinging it
out as far as it
will go and
lifting it slightly
so that the
bottom tap of
thelterfunnelisclearofthe
bottom ring on the water reservoir.
Thelterfunnelmaynowbelifted
off.
oReplacethelterfunnelby
positioningthetoptapofthelter
funnel in the top ring on the water
reservoir. Ensure that the bottom tap
is level with the bottom ring, then
pulldownthelterfunnelslightlyso
it locks into position.