12
Helpful Hints for Brewing
Fresh Water
For optimal results, use fresh water daily. If you haven’t used your
machine for a few days, follow steps 1 - 9 in section “Before Using Your
One:One
™
Pod Brewing System,” pages 6 -9.
Note: If the Water Tank is dry for 3 or more days, review section “Before
Using Your One:One
™
Pod Brewing System,” steps 1 - 9.
Javapods
™
and Teapods
™
Remember to remove pods after use. If a pod is left inside the machine
for some time without having used the system, remove it and see “Before
Using Your One:One
™
Pod Brewing System,” page 6, before attempting
to brew coffee or tea.
Use only specially designed Melitta
®
javapods
™
or Cooper’s
®
teapods
™
in your One:One
™
Pod Brewing System. The use of loose ground
coffee, pods or tea bags not designed for the One:One
™
, may result in
poor coffee or tea, and could possibly damage the machine.
Never use torn javapods
™
or teapods
™
as this could clog the machine
and damage it. Each javapod
™
or teapod
™
is pre-portioned with the
optimal amount of coffee or tea required per cup.
User Maintenance Instructions
This appliance requires little maintenance.It contains no user serviceable
parts. Do not try to repair it yourself. Any servicing requiring disassembly
other than cleaning, must be performed by a qualified appliance repair
technician.
Care and Cleaning
CAUTION: Do not immerse cord, plug or machine in water or other
liquid.
1. Always unplug the appliance before
cleaning.
2. Clean the outer surface of the unit and
the Water Diffuser with a damp cloth.
3. Remove and disassemble the Drip
Spout Assembly: Pod Holder, Pod
Chamber and Drip Spout. To separate
the Pod Chamber and Drip Spout,
press Tab on the back side of the Drip
Spout to remove, see Figure 11.
FIGURE 11
Tab
MES2B/W/R/K/MG/CAN_IB_17-8-05 8/17/05 1:24 PM Page 8