Melitta MEX1B Espresso Maker User Manual


 
7
8. Place steam jet into a tall glass or mug. Move function knob
to position during the flowing process only for a few sec-
onds. This will clean any residue left in the tube from the milk
steaming process.
9. Turn function knob back to “BREW,” permitting the hot vinegar
to continue to flow in the carafe.
10. When the flow has stopped, turn function knob to “OFF”
position and allow to cool completely. Then remove basket,
filter, carafe and rinse with hot water.
11. Repeat above steps using cold water to rinse away any residual
vinegar. Repeat twice.
12. Turn the function knob to the “OFF” position and unplug the
espresso/cappuccino maker from the wall outlet.
Any servicing requiring disassembly other than the above
cleaning must be performed by an authorized service center.
Descaling (Continued)
IMPORTANT NOTICE
If any parts are missing or defective,
DO NOT
return this product.
Please call our Customer Service Department for assistance.
800-233-9054 Monday - Friday 9:00 am - 5:00 pm CST
Thank You
6
User Maintenance Instructions
1. Unplug the espresso/cappuccino maker from the electrical outlet
and allow to cool completely before cleaning.
2. The coffee filter basket and holder should be emptied and rinsed
thoroughly with warm water after every use. Dry thoroughly.
3. Clean the carafe and carafe lid with warm, soapy water. Handle
with extreme care, as glass will become slippery when wet.
4. The carafe drip plate can be removed and washed in warm water.
5. Wipe the outside of your espresso/cappuccino maker with a damp
cloth. NEVER IMMERSE THE APPLIANCE IN WATER OR ANY
OTHER LIQUID.
6. This appliance is for HOUSEHOLD USE ONLY!
Descaling
If you live in a hard-water area, minerals and calcium found in the
water will accumulate and affect the operation of your machine.
Approximately every six months (this can vary depending on water
conditions and frequency of use), your espresso/cappuccino maker
should be cleaned with distilled vinegar in the following manner in
order to remove the mineral deposits, also referred to as scale.
1. Before cleaning your espresso/cappuccino maker, make sure the
function knob is in the “OFF” position and the appliance has
been disconnected from the wall outlet.
2. Fill the carafe with distilled vinegar and pour into the reservoir as
you would with water.
3. Securely fasten the safety lid.
4. Attach empty coffee filter basket and holder.
5. Place carafe onto drip plate.
6. Plug the espresso/cappuccino maker into 120V AC electrical
outlet.
7. Turn function knob to “BREW.” In a few minutes, the hot vine-
gar will start to flow through the coffee basket into the carafe.