Mellerware 22751 Hot Beverage Maker User Manual


 
Dear customer,
Many thanks for choosing to purchase a Mellerware brand product.
Thanks to its technology, design and operation and the fact that it
exceeds the strictest quality standards, a fully satisfactory use and
long product life can be assured.
Description
A. Handle
B. Power indicator light
C. On/Off Switch
D. Corded base
E. Water Level Window
F. Body
G. Spout
H. Lid
IMPORTANT SAFETY INSTRUCTIONS:
When using electrical appliances, the following safety precautions
should always be followed to reduce the risk of electric shock,
personal injury and fire. Read all these
instructions carefully before using, and save for future reference
or new users.
1. This appliance is not intended for use by persons (including
children) with reduced
physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their
safety.
2. Children should be supervised to ensure that they do not play
with the appliance.
3. Do not operate the appliance with a damaged power supply
cord or plug or after the appliance malfunctions, or is dropped
or damaged in any manner. Return the product to the nearest
authorized service center for examination, repair or mechanical
adjustment.
4. To protect against electric shock, never immerse any appliance,
the mains lead or plug in water or any other liquid.
5. Never reach for any appliance that has fallen into water. Switch
off the power at the mains immediately and unplug. Do not re-use.
6. Avoid placing the appliance where the power cord may
accidentally get caught or the appliance may be knocked into a
sink.
7. Ensure hands are dry before operating the switch or turning off
at the mains.
8. Ensure the appliance is switched OFF before connecting to the
mains power supply.
9. Do not touch hot surfaces, use handle to pick up.
10. Do not carry the appliance by the cord or pull the cord to
remove the plug from the socket.
11. Do not operate this appliance with a damaged cord or plug. A
qualified electrician should carry out repairs.
12. If the appliance stops unexpectedly or appears to malfunction,
unplug from the mains and discontinue use immediately.
13. Never leave the appliance unattended when connected to the
mains power supply.
14. Unplug from the mains socket when not in use and before
cleaning or changing accessories.
15. Keep the appliance and cable away from sources of heat, sharp
objects or anything that may cause damage.
16. Keep all ventilation slots clear of debris and do not cover. Never
drop or insert objects into the openings.
17. Do not use outdoors. This appliance is designed for domestic
household use only.
18. Only use the appliance as described in this booklet.
ADDITIONAL WARNINGS FOR KETTLES:
1. The kettle is fitted with a dry-operation cut-out, that switches
off the kettle if it has boiled dry. If this happens allow the kettle to
cool down for approximately 15 minutes, and then fill the kettle
with cold water. This will reset the cut-out so that the kettle can be
used again.
2. Do not overfill. Check the water level gauge when filling.
3. Ensure the lid is closed properly before switching on, to prevent
water splashing out when boiling. Do not open the lid while the
kettle is boiling.
4. After the kettle has boiled it may need a few minutes to cool
down before re-boiling .
5. Take care when pouring. Pour slowly and do not over-tilt.
6. Make sure the kettle is always used on a flat surface.
7. Water will remain hot for a considerable amount of time after
boiling and will present a scalding hazard. Take care and keep away
from children.
8. The outside surface of the kettle will become hot during use. To
avoid injuries only use the handle.
9. Take care to avoid contact with the steam coming from the lid
or spout.
HOW TO OPERATE YOUR KETTLE
It is important that you read these instructions before using your
kettle for the first time.
1. Open the lid of the kettle by pressing the flip-up lid button, fill with
water to the desired level. (min. capacity is 0.5L and max. capacity
is 1.7L). In hard water areas, using purified or filtered water is
recommended to reduce the amount of scale build up in the kettle.
2. Close the lid by pressing it down until it clicks into place. Place
the kettle on a flat surface and plug into the mains.
3. To switch on the kettle, press the On/Off switch down. The power
indicator light will now be on. When the water has boiled the kettle
will automatically switch off. You can stop the kettle at any time by
pressing the On/Off switch up.
4. Pour slowly and carefully. If you wish to re-boil, please allow a
few minutes for the kettle to cool down.
PRODUCT SPECIFICATION:
Voltage: 220v - 240v
Power: 1850 - 2200W
Water capacity: Minimum 0.5L – Maximum 1.7L
Warning: If the kettle has just boiled it will be full of steam that will
escape if the lid is opened.
IMPORTANT: Do not open the lid when steam is coming out of
the spout.
Before pouring or filling always remember to disconnect from
electricity.
Note:
1. If the kettle is switched on when empty or with insufficient water,
then the kettle will switch off automatically to protect against dry
boiling. Wait until the heating element cools down, refill with tap
water and use as normal. This protection function is not designed
22751_IM.indd 2 2013/04/17 10:59:17 AM