Mellerware 2650DA Mixer User Manual


 
ance, this will increase the risk of electric shock.
20. Do not touch the plug with wet hands.
21. Take the necessary measures to avoid starting
the appliance involuntarily.
22. Do not touch any of the appliance’s moving
parts while it is operating.
Use and care:
1. Fully unroll the appliance’s power cable before
each use.
2. Do not use the appliance if its accessories are
not properly fitted.
3. Do not use the appliance if the accessories
attached to it are defective. Replace them im-
mediately.
4. Do not use the appliance if the on/off switch
does not work.
5. Do not move the appliance while in use.
6. Do not use the appliance if it is tipped up and
do not turn it over.
7. Do not force the appliance’s work capacity.
8. This appliance is for household use only, not
professional or industrial use.
9. This appliance should be stored out of reach of
children and/or the disabled.
10. Do not store the appliance on areas where the
temperature could be lower than 2ºC.
11. Do not expose to extreme temperatures or
strong magnetism.
12. Keep the appliance in a dry, dust-free place, out
of direct sunlight.
13. Make sure that dust, dirt or other foreign objects
do not block the fan grill on the appliance.
14. Keep the appliance in good condition. Check
that the moving parts are not misaligned or
locked and make sure there are no broken
parts or anomalies that may prevent the appli-
ance from operating correctly.
15. Never leave the appliance unattended while in
use.
16. Never leave the appliance connected and unat-
tended if is not in use. This saves energy and
prolongs the life of the appliance.
17. Do not use the appliance for more than 10 min-
utes at once. Let it cool for down for a couple of
minutes before using again.
Service:
Make sure that the appliance is serviced only by
specialist personnel, and that only original spare
parts or accessories are used to replace existing
parts/ accessories.
Any misuse or failure to follow the instructions
for use renders the guarantee and the manufac-
turer’s liability null and void.
Instructions for use
Before use:
Make sure that all the product’s packaging has
been removed.
Before using the product for the first time, clean
the parts that will come into contact with food in
the manner described in the cleaning section.
Prepare the appliance according to the function
you wish to use.
Use:
1. Take the length of cable required out of the
housing.
2. Connect the appliance to the mains.
3. The LED display will light up, displaying 00:00
4. Press gently with your hand on the upper part
while pressing the connect/ disconnect button
to raise the upper part (Fig. 1)
5. Place the bowl on base and position as shown
(Fig. 2)
6. Place the accessory that will be used on the
mounting, ensuring that it fits over the hole
and turn in an anti-clockwise direction until it is
tightly fitted (Fig. 3)
7. Press the connect/disconnect button and press
the upper part downwards until the button is
returned to its original position (Fig. 4)
8. Put the lid on to prevent splashing.
9. Start the appliance by turning on the speed
regulator.
10. If no specific operating time has been pro-
grammed, the LED display will show the time
that has elapsed since the operating speed
was selected.
11. To avoid a fierce start up of the fan, it is advis-
able to start off from the lowest speed posi-
tion and, once the fan has been switched on,
progressively increase the speed to the desired
position.