Filter
Top Products
minutes at any one time. Allow appliance to cool
down for one hour before subsequent use.
- Do not use the appliance with frozen foods or
food containing bones.
- Exercise extreme caution during the assembly
and disassembly of the cutting blade as the teeth
are extremely sharp and could cause serious harm.
- This appliance must be used with the sliding feed
table and the piece holder in position unless this
is not possible due to the size or shape of the
food.
- Any misuse or failure to follow the instructions for
use renders the guarantee and the manufacturer’s
liability null and void.
Instructions for use:
- Insert the plug into the wall socket.
- Place the food item on the lower support platform
and attach the food pusher to the platform, which
will hold the food item in place (Fig. 1).
- Adjust the thickness of the slice using the
thickness control dial (Fig. 2).
- Switch the appliance on using the on/off button.
- Using the food pusher slide the food item towards
the blade (Fig. 1).
Once you have finished using the appliance:
- Switch off the appliance.
- Remove the plug from the wall socket.
- Clean the appliance.
Cleaning
- Disconnect the appliance from the wall socket
and allow it to cool down before undertaking any
cleaning task.
- Clean the components using dish washing liquid
and a damp cloth. Make sure all components are
dry afterwards.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products, for
cleaning the appliance.
- Do not submerge the appliance in water or any
other liquid, or place it under a running tap.
- During the cleaning process, take special care
with the cutting blade as the teeth are very sharp.
- It is advisable to clean the appliance regularly and
remove any food remains.
- If the appliance is not clean, its surface
may degrade and reduce the lifespan of the
appliance and become unsafe to use.
The following components may be washed in a
dishwasher:
- Food pusher (may only be placed in the top
section of the dishwasher)
- Lower support platform
- Cutting blade
To disassemble the blade:
- The cutting blade can be removed for
cleaning. To do so, use a Phillip/Star screwdriver
to loosen the three screws on the blade and
take off the blade carefully. After cleaning,
reattach the cutting blade with the same three
screws.
Anomalies and repair
- Take the appliance to an authorised technical
support service agent if any problems arise.
Do not try to dismantle or repair the appliance,
as this may be dangerous.
- If the connection to the plug or cord has been
damaged, it must be replaced and you should
proceed as you would in the case of damage.
Ecology and recyclability of the product
- The appliances’ packaging materials are
included in a collection, classification and
recycling system. Should you wish to dispose
of them, use the appropriate public containers
for each type of material.
- The product does not contain concentrations
of substances that could be considered
harmful to the environment.
- Should you wish to dispose of the product
once its’ working life has ended, take it to
an authorised waste agent for electric and
electronic appliances.
26601 IM.indd 4 2011/11/15 03:16:28 PM